74ACT11139DR
| Parameters | |
|---|---|
| Number of Input Lines | 2 |
| Voltage Supply Source | Single Supply |
| Input Conditioning | STANDARD |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ACT |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Decoder/Demultiplexer |
| Additional Feature | CENTER VCC/GND PINS |
| Subcategory | Decoder/Drivers |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ACT11139 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Circuit | 1 x 2:4 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Propagation Delay | 7.8 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 8.5 ns |
| Family | ACT |
| Current - Output High, Low | 24mA 24mA |
| Supply Type | Single |
| Bandwidth | 100MHz |
74ACT11139DR Overview
In order to save board space, digital switch is located in the 16-SOIC (0.154, 3.90mm Width).In this case, it is packaged as Tape & Reel (TR).In terms of mounting, digital switch ic uses the Surface Mount method .the multiplexers uses an analog IC Decoder/Demultiplexer.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.When operated with a 4.5V~5.5V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.Multiplexers of the 74ACT series can be used in a wide range of applications.As part of its basic configuration, 16 terminations are designed as a part of it.The base part number is 74ACT11139, which can also be used to find its logic switch related parts.The multiplexer's system is powered by 5V volts.A component pin count of 16 can be found on this turn signal switch.As a result, GULL WING represents the end of the conductors.Its supply type is Single, which is used as the source of power.There are 16 pins on it.The mounting point is Surface Mount.The logic switch belongs to the family of ACT.Signal multiplexer contains 4 bits.In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 5.5V.For mux switch's normal operation, power supply 5V is provided.For the turn signal switch's operation, there are 4 outputs.The part belongs to the Decoder/Drivers category of signal switches.No external influence consumes 8μA current of multiplexer ic.The switches is packaged according to the way of TAPE AND REEL.A voltage level can be inserted into the 2 input lines of multiplexers.Furthermore, the characteristics of CENTER VCC/GND PINS have been improved.
74ACT11139DR Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
2 input lines
CENTER VCC/GND PINS
74ACT11139DR Applications
There are a lot of Texas Instruments 74ACT11139DR Signal Switches / Multiplexers / Decoders applications.
- Speed synchronization of multiple motors in industries
- Image transmission
- To select different task for memory in microprocessor memory systems
- Arithmetic Logic Units
- Automatic Monitoring systems
- Electronic circuits
- Speed control of medern motors
- Analog to digital conversion
- Data bus control
- VGA
