74ACT11139DRG4
| Parameters | |
|---|---|
| Weight | 141.690917mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ACT |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Decoder/Demultiplexer |
| Additional Feature | CENTER VCC/GND PINS |
| Subcategory | Decoder/Drivers |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ACT11139 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Circuit | 1 x 2:4 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Propagation Delay | 7.8 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 8.5 ns |
| Family | ACT |
| Current - Output High, Low | 24mA 24mA |
| Supply Type | Single |
| Bandwidth | 100MHz |
| Number of Input Lines | 2 |
| Voltage Supply Source | Single Supply |
| Input Conditioning | STANDARD |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
74ACT11139DRG4 Overview
The reason it is provided is that the board space can be saved by placing digital switch in the 16-SOIC (0.154, 3.90mm Width).It is packaged according to the Tape & Reel (TR) method.digital switch ic uses the method of Surface Mount for mounting.The analog IC used in the multiplexers can be referred to as Decoder/Demultiplexer.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at 4.5V~5.5V, designers are provided with a greater degree of flexibility.The multiplexers from 74ACT series can be used for a wide range of applications.This configuration includes 16 terminations as part of its basic functionality.There is a base part number of 74ACT11139 which can also be used in order to locate the logic switch that are related to this item.For multiplexer's system, 5V voltage is supplied.In this turn signal switch, there are 16 component pins.Conductors terminate at GULL WING in this design.There is a type of supply Single that is employed in this case.With 16 pins, it is configured.The mount is in Surface Mount.In the ACT family, the logic switch is included.Signal multiplexer provides 4 bits.Avoid unnecessary failures by keeping Vsup at 5.5V.The power supply of 5V is provided for mux switch's normal operation.The turn signal switch has 4 outputs designed for operation.This is an the digital switch ic that is classified as Decoder/Drivers.It consumes 8μA current of multiplexer ic without external influences.TAPE AND REEL is used to package the switches.A voltage level can be inserted into the 2 input lines of multiplexers.Additionally, CENTER VCC/GND PINS has improved characteristics.
74ACT11139DRG4 Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
2 input lines
CENTER VCC/GND PINS
74ACT11139DRG4 Applications
There are a lot of Texas Instruments 74ACT11139DRG4 Signal Switches / Multiplexers / Decoders applications.
- Electronic circuits
- Small scale TV wall
- A/D converters
- Microprocessor instruction decoding
- GLAN
- To select different task for memory in microprocessor memory systems
- Paper plants
- Electronically controlled engine system
- Make half adder
- Code converters
