banner_page

74ACT11257DW

20 Terminations4.5V~5.5V 20 Pin 74ACT11257 Signal switch74ACT Series 1 Outputs4 Functions


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-74ACT11257DW
  • Package: 20-SOIC (0.295, 7.50mm Width)
  • Datasheet: PDF
  • Stock: 281
  • Description: 20 Terminations4.5V~5.5V 20 Pin 74ACT11257 Signal switch74ACT Series 1 Outputs4 Functions(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 week ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-SOIC (0.295, 7.50mm Width)
Number of Pins 20
Weight 500.709277mg
Operating Temperature -40°C~85°C
Packaging Tube
Series 74ACT
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
Termination SMD/SMT
ECCN Code EAR99
Type Multiplexer
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature CENTER VCC/GND PINS
Technology CMOS
Voltage - Supply 4.5V~5.5V
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 5V
Base Part Number 74ACT11257
Pin Count 20
Number of Outputs 1
Circuit 4 x 2:1
Polarity Non-Inverting
Supply Voltage-Max (Vsup) 5.5V
Power Supplies 5V
Number of Channels 4
Load Capacitance 50pF
Power Dissipation 774mW
Number of Bits 2
Throw Configuration DPST
Propagation Delay 8 ns
Family ACT
Number of Inputs 8
Output Characteristics 3-STATE
Current - Output High, Low 24mA 24mA
Supply Type Dual
Bandwidth 100MHz
Voltage Supply Source Single Supply
Independent Circuits 1
Height 2.65mm
Length 12.8mm
Width 7.5mm
Thickness 2.35mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

74ACT11257DW Overview


In order to conserve board space, digital switch is included in the 20-SOIC (0.295, 7.50mm Width).It is packaged according to the Tube method.For mounting, digital switch ic uses the method Surface Mount.The analog IC used in the multiplexers can be referred to as Multiplexer.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.When operated with a 4.5V~5.5V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.These multiplexers are members of the 74ACT series, which provide extensive application potential.As part of its basic configuration, 20 terminations are designed as a part of it.The base part number is 74ACT11257, which is also useful when looking up signal switch's related components.The multiplexer's system works with 5V voltage.A component pin count of 20 can be found on this turn signal switch.It is the end of conductors that is represented by GULL WING.Dual is employed as its supply type.A configuration of 20 pins is used.The multiplexer ic is mounted in the direction of Surface Mount.Among the family of ACT the logic switch is a member.In this signal multiplexer, there are 2 bits provided.It is advisable to keep the maximum supply voltage (Vsup) at 5.5V so as to avoid some unnecessary failures.For mux switch's normal operation, power supply 5V is provided.In order for the turn signal switch to work, there are 1 outputs.In this multiplexer, there is a total of 8 inputs.In the turn signal switch's circuit, there are 4 channels used for transmission.Furthermore, the characteristics of CENTER VCC/GND PINS have been improved.

74ACT11257DW Features


Supplied in the 20-SOIC (0.295, 7.50mm Width) package
Adopting a supply type of Dual
Power supplies of 5V
CENTER VCC/GND PINS

74ACT11257DW Applications


There are a lot of Texas Instruments 74ACT11257DW Signal Switches / Multiplexers / Decoders applications.

  • Combinational circuit
  • Arithmetic Logic Units
  • Audio transmission
  • Computer memory
  • Automatic health monitoring systems
  • Injectors
  • Enabling block of memory depending on address in memory chips
  • Used to connect a single source to multiple destinations
  • Encrypted communications system
  • Electronically controlled engine system

Write a review

Note: HTML is not translated!
    Bad           Good