banner_page

74ACT11373DBR

D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74ACT Series 74ACT11373 24 Pins DUAL CMOS 24-SSOP (0.209, 5.30mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-74ACT11373DBR
  • Package: 24-SSOP (0.209, 5.30mm Width)
  • Datasheet: -
  • Stock: 364
  • Description: D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74ACT Series 74ACT11373 24 Pins DUAL CMOS 24-SSOP (0.209, 5.30mm Width)(Kg)

Details

Tags

Parameters
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.65mm
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number 74ACT11373
Pin Count 24
Qualification Status Not Qualified
Output Type Tri-State
Operating Supply Voltage 5V
Circuit 8:8
Polarity Non-Inverting
Power Supplies 5V
Load Capacitance 50pF
Number of Ports 2
Output Current 24mA
Number of Bits 8
Propagation Delay 10.3 ns
Quiescent Current 8μA
Turn On Delay Time 8.5 ns
Family ACT
Logic Function D-Type, Latch
Current - Output High, Low 24mA 24mA
Logic Type D-Type Transparent Latch
Control Type ENABLE LOW/HIGH
Number of Input Lines 1
Number of Output Lines 3
Translation N/A
Height 2mm
Length 8.2mm
Width 5.3mm
Thickness 1.95mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Lifecycle Status ACTIVE (Last Updated: 4 days ago)
Contact Plating Gold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 24-SSOP (0.209, 5.30mm Width)
Number of Pins 24
Weight 172.39345mg
Operating Temperature -40°C~85°C
Packaging Cut Tape (CT)
Series 74ACT
JESD-609 Code e4
Pbfree Code yes
Part Status Discontinued
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 24
ECCN Code EAR99
Subcategory FF/Latches
Packing Method TR
Technology CMOS
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Terminal Form GULL WING

74ACT11373DBR Overview


The package in which it is embedded is named 24-SSOP (0.209, 5.30mm Width). Cut Tape (CT) is the way in which it is packaged. Tri-State is used for the output it is configured with. D-Type Transparent Latch is the logic type of this electrical device. Electronic components are mounted using the Surface Mount method. With a supply voltage of 4.5V~5.5V, it operates. During operation, the temperature is set at -40°C~85°C. The 74ACT series contains FPGAs of this type. It is designed with 8 bits. The device consists of 24 terminations that are designed to be used in conjunction with it. 74ACT11373 is its family. In order to function, the supply voltage should be set to 5V. There are 24 pins attached to it. This electronic device is categorized as a ACT electronic device. The device has 24 pins. Surface Mount is the method used for mounting this electronic part. In this device, there is a total of 2 ports available for use. FF/Latches is the subcategory of this part. There are 5V power supplies attached to it. In the circuit, there are 1 input lines that are constituted by an electronic circuit. As a result of its reliable performance, it is well suited for TR. It features maximum flexibility in design due to 24mA output current. Optimal efficiency requires 5V as the supply voltage. Input lines are converted into binary equivalents by 3 output lines. As far as external factors are concerned, it consumes 8μA of quiescent current without getting affected by them.

74ACT11373DBR Features


24-SSOP (0.209, 5.30mm Width) package
74ACT series
8 Bits
74ACT11373 family
24 pin count
24 pins
5V power supplies

74ACT11373DBR Applications


There are a lot of Texas Instruments 74ACT11373DBR Latches applications.

  • Automotive Cluster
  • Up/down difference counting
  • Automotive Body Electronics
  • Parallel data synchronization
  • Parallel Input
  • Multistage ripple counting
  • Frequency dividing
  • BCD counting
  • Pattern generators
  • Relay

Write a review

Note: HTML is not translated!
    Bad           Good