74ACT11373DW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Weight | 624.398247mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 1MHz |
| Base Part Number | 74ACT11373 |
| Pin Count | 24 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 12.5 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 8.5 ns |
| Family | ACT |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Control Type | ENABLE LOW/HIGH |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Translation | N/A |
| Height | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74ACT11373DW Overview
In the 24-SOIC (0.295, 7.50mm Width) package, it can be found as an embedded module. The package is in the form of Tube. The output it is configured with uses Tri-State. There is a logic type of D-Type Transparent Latch for this electrical device. Mounting this electronic component follows the Surface Mount method. The voltage supply is 4.5V~5.5V. There is a temperature of -40°C~85°C at which the system operates. An FPGA in this series belongs to the 74ACT family. It is designed with 8 bits. A device such as this has 24 terminations designed. There is no doubt that it belongs to the family 74ACT11373. The supply voltage of the device is 5V. The 24 pind are equipped with it. It is part of the family of electronic devices called ACT. With the design of the board, there are only 24 pins. The electronic part is mounted in a way that corresponds to Surface Mount. This device has 2 ports on board, which are all available at the same time. In the subcategory FF/Latches, this part belongs. It operates from 5V power supplies. It contains 8 input lines where electronic circuits are present. The output current of 24mA makes it feature maximum design flexibility. A high level of efficiency is achieved by maintaining the supply voltage at 5V. A binary equivalent of the input line is generated by the 3 output lines. Without external influences, it consumes 8μA of quiescent current.
74ACT11373DW Features
24-SOIC (0.295, 7.50mm Width) package
74ACT series
8 Bits
74ACT11373 family
24 pin count
24 pins
5V power supplies
74ACT11373DW Applications
There are a lot of Texas Instruments 74ACT11373DW Latches applications.
- Ring counter
- Flip-flops
- Parallel Input
- Programmable binary
- Decade counting 7-segment decimal display
- Phase comparator
- Automotive ADAS
- Parallel data synchronization
- Hammer
- Audio and video switching
