74ACT11373DWG4
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 24 |
| Weight | 624.398247mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 24 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 24 |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Current - Output | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 12.5 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 8.5 ns |
| Family | ACT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -24mA |
| Low Level Output Current | 24mA |
| Control Type | ENABLE LOW/HIGH |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 2.35mm |
| Length | 15.4mm |
| Width | 7.52mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74ACT11373DWG4 Overview
In the SOIC package, it can be found as an embedded module. With this electronic part, there are 8 bits. As far as this device is concerned, it has no terminations. With a supply voltage of 5V, it operates. With 24 pins, it is equipped. This electronic device belongs to the family of ACT. The device has 24 pins. Surface Mount is the way in which this electronic part is mounted. This device has a total of 2 ports. In the subcategory FF/Latches, this part belongs. The device is powered by 5V power supplies. High efficiency requires a supply voltage of 5V. It consumes 8μA of quiescent current without being affected by external factors. In order to achieve its superior flexibility, 8 circuits are used. In the low level output current, the value is set to 24mA. There is -24mA high level output current set. There should be a temperature below 85°C at which the system is operating. -40°C is the minimum operating temperature. The maximum supply voltage is 5.5V. The minimal voltage for operation is 4.5V. As for the logic IC it uses, it is a BUS DRIVER. Due to its 24mA output current, it offers maximum design flexibility.
74ACT11373DWG4 Features
SOIC package
8 Bits
24 pin count
24 pins
5V power supplies
74ACT11373DWG4 Applications
There are a lot of Texas Instruments 74ACT11373DWG4 Latches applications.
- Frequency dividing
- Counter control
- A/D and D/A conversion
- Parallel Input
- Shift register
- Display driver
- Shift right register
- Communication systems
- Shift left with parallel loading
- Parallel data synchronization
