74ACT11373DWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Weight | 624.398247mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Subcategory | Bus Driver/Transceiver |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74ACT11373 |
| Pin Count | 24 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 10.3 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 8.5 ns |
| Family | ACT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Control Type | ENABLE LOW/HIGH |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Translation | N/A |
| Height | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74ACT11373DWR Overview
It is embedded in the 24-SOIC (0.295, 7.50mm Width) package. The package is in the form of Tape & Reel (TR). It uses Tri-State as its output configuration. In this electrical device, the logic type is D-Type Transparent Latch. A Surface Mount mount is used for mounting this electronic part. A 4.5V~5.5V supply voltage is required to operate it. There is a temperature of -40°C~85°C at which the system operates. The 74ACT series of FPGAs is the one this FPGA belongs to. It is designed with 8 bits. A device such as this has 24 terminations designed. As a member of the 74ACT11373 family, it falls under that category. It operates with a supply voltage of 5V. There are 24 pins on it. ACT is the family name of this electronic device. The 24 pins are designed into it. Surface Mount is the way in which this electronic part is mounted. In this device, there are 2 ports. There is a subcategory of Bus Driver/Transceiver for this part. A total of 5V power supplies are needed to run it. Electronic circuits are represented by 8 input lines. Based on its reliable performance, this device is appropriate for TR. The output current of 24mA makes it feature maximum design flexibility. High efficiency requires a voltage supply of 5V. Without external influences, it consumes 8μA quiescent current.
74ACT11373DWR Features
24-SOIC (0.295, 7.50mm Width) package
74ACT series
8 Bits
74ACT11373 family
24 pin count
24 pins
5V power supplies
74ACT11373DWR Applications
There are a lot of Texas Instruments 74ACT11373DWR Latches applications.
- Parallel data storage
- High-speed logic
- Counting
- Display
- Digital bus buffer
- Automotive HEV/EV Powertrain
- Parallel-to-Serial Data Conversion
- Four-bit storage with output enable
- Shift left with parallel loading
- Parallel Input
