banner_page

74ACT11373NT

D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74ACT Series 74ACT11373 24 Pins DUAL CMOS 24-DIP (0.300, 7.62mm)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-74ACT11373NT
  • Package: 24-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 280
  • Description: D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74ACT Series 74ACT11373 24 Pins DUAL CMOS 24-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Contact Plating Gold
Mount Through Hole
Mounting Type Through Hole
Package / Case 24-DIP (0.300, 7.62mm)
Number of Pins 24
Weight 1.753503g
Operating Temperature -40°C~85°C
Packaging Tube
Series 74ACT
JESD-609 Code e4
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 24
ECCN Code EAR99
Subcategory FF/Latches
Technology CMOS
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 2.54mm
Base Part Number 74ACT11373
Pin Count 24
Output Type Tri-State
Operating Supply Voltage 5V
Circuit 8:8
Polarity Non-Inverting
Power Supplies 5V
Load Capacitance 50pF
Number of Ports 2
Output Current 24mA
Number of Bits 8
Propagation Delay 10.3 ns
Quiescent Current 8μA
Turn On Delay Time 8.5 ns
Family ACT
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Current - Output High, Low 24mA 24mA
Logic Type D-Type Transparent Latch
Number of Input Lines 8
Independent Circuits 1
Width 7.62mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

74ACT11373NT Overview


A package called 24-DIP (0.300, 7.62mm) contains it. Tube is the way in which it is packaged. It is configured with an output of Tri-State. The Logic type of this electrical device is D-Type Transparent Latch. Mounting this electronic component follows the Through Hole method. A voltage of 4.5V~5.5V is used as the supply voltage for this device. A temperature of -40°C~85°C is set as the operating temperature. An FPGA in this series belongs to the 74ACT family. An electronic part with 8 bits is designed. In this device, there are 24 terminations. It is a member of the 74ACT11373 family. With the supply voltage set at 5V, it is able to operate. It has 24 pins that makes it easy to use. It is part of the family of electronic devices called ACT. This board has 24 pins on it, which is what it is designed for. This electronic part is mounted in the way of Through Hole. This device is equipped with 2 ports. FF/Latches is the subcategory of this part. There are 5V power supplies required for this machine to operate. There are 8 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. The output current of 24mA makes it feature maximum design flexibility. High efficiency requires maintaining the supply voltage at 5V. The current consumed by the device is 8μA volts in quiescent mode, which cannot be affected by external factors.

74ACT11373NT Features


24-DIP (0.300, 7.62mm) package
74ACT series
8 Bits
74ACT11373 family
24 pin count
24 pins
5V power supplies

74ACT11373NT Applications


There are a lot of Texas Instruments 74ACT11373NT Latches applications.

  • Relay
  • Watches
  • Automotive HEV/EV Powertrain
  • Parallel Output
  • Shift left with parallel loading
  • Registers
  • Shift right register
  • Up-Down Johnson
  • Pattern Generators
  • OC-48 communication systems

Write a review

Note: HTML is not translated!
    Bad           Good