74ACT11374NSRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ACT |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ACT11374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Clock Frequency | 70MHz |
| Propagation Delay | 11.3 ns |
| Turn On Delay Time | 8.5 ns |
| Family | ACT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 11.3ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 55000000Hz |
| Height Seated (Max) | 2mm |
| RoHS Status | Non-RoHS Compliant |
74ACT11374NSRE4 Overview
It is packaged in the way of 24-SOIC (0.209, 5.30mm Width). The package Tape & Reel (TR)contains it. The output it is configured with uses Tri-State, Non-Inverted. It is configured with the trigger Positive Edge. There is an electric part mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 4.5V~5.5V. A temperature of -40°C~85°C TAis considered to be the operating temperature. This electronic flip flop is of type D-Type. JK flip flop is a part of the 74ACTseries of FPGAs. It should not exceed 70MHzin its output frequency. A total of 1elements are present in it. Despite external influences, it consumes 8μAof quiescent current. There are 24 terminations,The 74ACT11374family includes it. It is powered from a supply voltage of 5V. This T flip flop has a capacitance of 4pF farads at the input. This D flip flop belongs to the family of ACT. Electronic part Surface Mountis mounted in the way. Basically, it is designed with a set of 24 pins. This device has the clock edge trigger type of Positive Edge. This part is included in FF/Latches. It reaches 5.5Vwhen the supply voltage is maximal (Vsup). Normally, the supply voltage (Vsup) should be kept above 4.5V. As a result of its reliable performance, this T flip flop is suitable for TAPE AND REEL. There are 5V power supplies attached to it. This flip flop has a total of 2ports. It operates with 3 output lines.
74ACT11374NSRE4 Features
Tape & Reel (TR) package
74ACT series
24 pins
5V power supplies
74ACT11374NSRE4 Applications
There are a lot of Texas Instruments 74ACT11374NSRE4 Flip Flops applications.
- Bus hold
- ESCC
- Synchronous counter
- Test & Measurement
- Buffered Clock
- Differential Individual
- Cold spare funcion
- EMI reduction circuitry
- Balanced 24 mA output drivers
- Storage Registers
