74ACT138TTR
| Parameters | |
|---|---|
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74ACT138 |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 1 x 3:8 |
| Polarity | Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Propagation Delay | 10.5 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 10.5 ns |
| Family | ACT |
| Logic Function | Decoder, Demultiplexer |
| Number of Inputs | 3 |
| Current - Output High, Low | 24mA 24mA |
| Supply Type | Single |
| Max I(ol) | 0.024 A |
| Voltage Supply Source | Single Supply |
| Input Conditioning | STANDARD |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Decoder/Demultiplexer |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Subcategory | Decoder/Drivers |
| Packing Method | TAPE AND REEL |
74ACT138TTR Overview
Digital switch is provided in the 16-TSSOP (0.173, 4.40mm Width) for the purpose of saving board space.As a result, it is packaged in the way of Tape & Reel (TR).Digital switch ic adheres to a mounting method of Surface Mount.In the multiplexers, the analog IC is indicated by Decoder/Demultiplexer.If the operating temperature is maintained at -55°C~125°C, turn signal switch will not be susceptible to external factors.Designers have greater flexibility when digital controlled switch operates at a 4.5V~5.5V supply voltage.In addition to being a member of the 74ACT series, these multiplexers have a wide range of applications.The basic configuration of this system includes 16 terminations.You can also find related parts by using its logic switch base part number of 74ACT138.In multiplexer's system, 5V is the voltage supplied.This turn signal switch consists of 16 component pins.As the end of conductors, it uses GULL WING.Single is used as its supply type.The board has 16 pins configured.It is positioned in the direction of Surface Mount.The logic switch belongs to the family of ACT.In order to maintain mux switch's normal operation, power is provided to 5V.As part of the operation of this turn signal switch, there are 8 outputs.This is an the digital switch ic that is classified as Decoder/Drivers.It consumes 4μA current of multiplexer ic without external influences.The performance of the multiplexers can be reliably maintained at a voltage of 5V.This multiplexer is equipped with 3 inputs and 3 outputs.Currently, the switches is packaged in accordance with the TAPE AND REEL method.In mux switch configuration, there are 1 elements.
74ACT138TTR Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
74ACT138TTR Applications
There are a lot of STMicroelectronics 74ACT138TTR Signal Switches / Multiplexers / Decoders applications.
- Data-routing applications
- Analog to digital conversion
- Data distribution
- Audio transmission
- Enabling different rows of memory depending on address in memory chips
- Image transmission
- Data demultiplexing
- Encrypted communications system
- HD surveillance system
- LVDS
