74ACT158SJ
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74ACT |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Multiplexer |
| Terminal Finish | MATTE TIN |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Qualification Status | COMMERCIAL |
| Circuit | 4 x 2:1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Family | ACT |
| Number of Inputs | 2 |
| Current - Output High, Low | 24mA 24mA |
| Output Polarity | INVERTED |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
74ACT158SJ Overview
Providing this information in the 16-DIP (0.300, 7.62mm) enables digital switch board space to be saved.Tube is the method used for packaging.The mounting method digital switch ic uses is Through Hole.A digital IC Multiplexer is used as the analog component of the multiplexers.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 4.5V~5.5V.provides digital controlled switch's digital controlled switch'sThe multiplexers can be used for a wide range of applications since they are members of 74ACT series.Among its basic features are 16 terminations.The multiplexer's system is supplied with a voltage of 5V.A component pin count of 16 is found on this turn signal switch.GULL WING represents the end of conductors.There is a family of ACT members.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 4.5V.Vsup (maximum supply voltage) should be kept as 5.5V to prevent unnecessary failures.The turn signal switch has 1 outputs.A multiplexer such as this has 2 inputs available.
74ACT158SJ Features
Supplied in the 16-DIP (0.300, 7.62mm) package
74ACT158SJ Applications
There are a lot of Rochester Electronics, LLC 74ACT158SJ Signal Switches / Multiplexers / Decoders applications.
- Control unit of Central Processing unit (CPU)
- D/A converters
- Memory system of computers
- Recording transmission
- Arithmetic Logic Units
- Data bus control
- Metal detectors
- To select different devices in microprocessor input
- Night vision cameras
- Make half adder
