74ACT161SJ
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Supplier Device Package | 16-SOP |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74ACT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.5V~5.5V |
| Base Part Number | 74ACT161 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 4 |
| Propagation Delay | 10.5 ns |
| Turn On Delay Time | 14.5 ns |
| Reset | Asynchronous |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Number of Bits per Element | 4 |
| Trigger Type | Positive Edge |
| Sync/Async | Synchronous |
| Number of Input Lines | 4 |
| Number of Output Lines | 4 |
| Clock Edge Trigger Type | Positive Edge |
| Count Rate | 125MHz |
| Timing | Synchronous |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74ACT161SJ Overview
A 16-SOIC (0.209, 5.30mm Width)package is used for this device. The 1elements are connected by wires. Tubeis the packaging method used for this package. Circuit components are connected with 16pins. The device is mounted in the direction of [0]. With its 74ACTseries designation, it can be used for a range of applications. Binary Counteris used as the logic type. Ideally, the operating temperature should be set to -40°C~85°C. The mounting type is Surface Mount. When a supply voltage of 4.5V~5.5Vis provided, it can operate with greater reliability. An array consists of 4bits for each element. The device contains 4bits of information. Under its base part number of [0], you will find additional related parts. To operate, the device requires a voltage of [0]. Long-term operation at 85°Cwith acceptable electrical stability is possible. This device is designed to operate within a specified temperature range with a lower limit generally set at -40°C. 5.5Vis the maximum voltage that the device can handle. There is a minimum voltage available for the device of 4.5V. The 4input lines are used to input binary data as on/off signals. There are 4 output lines on this device. For normal operation, it is equipped with 1circuits.
74ACT161SJ Features
Embedded in the 16-SOIC (0.209, 5.30mm Width) package
4 bits per element
Operating supply voltage of 5V
74ACT161SJ Applications
There are a lot of ON Semiconductor 74ACT161SJ Counters & Dividers applications.
- ALGEBRAIC COMPUTATION
- Signal gating
- Communications Digital Frequency Synthesizers;
- Counter control/timers
- Time delay circuits
- Divide-by"N" counters/frequency synthesizers
- SQUARE ROOT
- counting/frequency sy nthesizers-BCD output
- Analog multiplexing and demultiplexing
- Control counters
