74ACT16373DL
| Parameters | |
|---|---|
| Number of Output Lines | 16 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 2.79mm |
| Length | 15.88mm |
| Width | 7.49mm |
| Thickness | 2.59mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 48 |
| Weight | 600.301152mg |
| Manufacturer Package Identifier | DL0048A |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Base Part Number | 74ACT16373 |
| Pin Count | 48 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 1mA |
| Output Current | 24mA |
| Number of Bits | 16 |
| Propagation Delay | 14.2 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 9.3 ns |
| Family | ACT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Control Type | ENABLE LOW/HIGH |
| Power Supply Current-Max (ICC) | 0.08mA |
74ACT16373DL Overview
There is an embedded version of it in package 48-BSSOP (0.295, 7.50mm Width). The package is in the form of Tube. In its configuration, Tri-State is used as the output. This electrical device has a logic type of D-Type Transparent Latch. Electronic parts are mounted in accordance with Surface Mount. A voltage of 4.5V~5.5V is used as the supply voltage for this device. A temperature of -40°C~85°C is set as the operating temperature. It is a type of FPGA belonging to the 74ACT series. It is designed with 16 bits. In this device, there are 48 terminations that have been designed. 74ACT16373 is its family. A 5V voltage supply is required for operation. The 48 pind are equipped with it. This electronic device belongs to the family of ACT. The pin configuration of the device is 48. Electronic parts are mounted using the Surface Mount method. This device has a total of 2 ports. The part is in the FF/Latches subcategory. There are 5V power supplies attached to it. With an output current of 24mA, it is highly flexible in terms of design. High efficiency requires maintaining the supply voltage at 5V. Regardless of the input line, the binary equivalent of the input line will be generated by the 16 output lines. Without external influences, it consumes 8μA quiescent current. 2 elements are present in it. In order for the device to operate at its maximum power, the maximum power current (ICC) of 0.08mA is needed for operation.
74ACT16373DL Features
48-BSSOP (0.295, 7.50mm Width) package
74ACT series
16 Bits
74ACT16373 family
48 pin count
48 pins
5V power supplies
2 elements
74ACT16373DL Applications
There are a lot of Texas Instruments 74ACT16373DL Latches applications.
- Motor Drives
- Parallel Output
- Serial Input
- Four-bit storage with output enable
- Instrumentation
- Shift right register
- Automotive Body Electronics
- Automotive HEV/EV Powertrain
- Hammer
- Automotive Infotainment
