74ACT16373DLG4
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 48 |
| Weight | 600.301152mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Pin Count | 48 |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Current - Output | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 14.2 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 9.3 ns |
| Family | ACT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -24mA |
| Low Level Output Current | 24mA |
| Number of Input Lines | 16 |
| Height | 2.59mm |
| Length | 16mm |
| Width | 7.59mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74ACT16373DLG4 Overview
In the SSOP package, it can be found as an embedded module. With this electronic part, there are 8 bits. A device with this design has 48 terminations. With the supply voltage set at 5V, it is able to operate. There are 48 pins attached to it. It is part of the family of electronic devices called ACT. In addition, it is designed with a pin number of 48. It is mounted according to the Surface Mount method. This device has 2 ports. FF/Latches is the subcategory of this part. 5V power supplies are needed to operate it. Electronic circuits are represented by 16 input lines. A high efficiency supply voltage should be maintained at 5V. It consumes 8μA of quiescent current without being affected by external factors. A total of 2 elements make up this object. It is set to zero for the low level output current. There is -24mA high level output current set. It is recommended that the operating temperature not exceed 85°C. -40°C is the minimum operating temperature. There is a maximum voltage supply of 5.5V that can be applied to it. There is a minimum supply voltage of 4.5V for it. As for the logic IC it uses, it is a BUS DRIVER. With 24mA, maximum design flexibility is ensured.
74ACT16373DLG4 Features
SSOP package
8 Bits
48 pin count
48 pins
5V power supplies
2 elements
74ACT16373DLG4 Applications
There are a lot of Texas Instruments 74ACT16373DLG4 Latches applications.
- Automotive Infotainment
- Buffer/Storage Registers
- Multi-line decoders
- Pattern generators
- OC-48 communication systems
- Display
- Clocks
- General-Purpose Register
- Hammer
- Parallel Input
