74ACT16373DLR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 48 |
| Weight | 600.301152mg |
| Manufacturer Package Identifier | DL0048A |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Subcategory | Bus Driver/Transceiver |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | 74ACT16373 |
| Pin Count | 48 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 16 |
| Propagation Delay | 9.7 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 9.3 ns |
| Family | ACT |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Control Type | ENABLE LOW/HIGH |
| Power Supply Current-Max (ICC) | 0.08mA |
| Number of Input Lines | 1 |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 2.79mm |
| Length | 15.88mm |
| Width | 7.49mm |
| Thickness | 2.59mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74ACT16373DLR Overview
A package called 48-BSSOP (0.295, 7.50mm Width) contains it. Packaged in the way of Tape & Reel (TR). There is a Tri-State output configured. This electrical device has the logic type D-Type Transparent Latch. Based on the way of Surface Mount, this electronic part is mounted. With a supply voltage of 4.5V~5.5V, it operates. It is -40°C~85°C at the operating temperature. The 74ACT series contains FPGAs of this type. This electronic part is designed with 16 Bits. In this device, there are 48 terminations. 74ACT16373 is its family. In order to operate it, the supply voltage must be 5V. The 48 pind are equipped with it. In the world of electronics, this electronic device belongs to the family of ACT. In addition, it is designed with a pin number of 48. A Surface Mount mounting method has been used for this electronic part. This device has a total of 2 ports. This part can be found within the Bus Driver/Transceiver subcategory. It operates from 5V power supplies. There are 1 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. Based on its reliable performance, this device is appropriate for TR. Due to its 24mA output current, it offers maximum design flexibility. For maximum efficiency, the supply voltage should be set to 5V. There are 3 output lines that correspond to the binary equivalents of the input line. There are no external factors that affect it, so it consumes 8μA quiescent current. A total of 2 elements make up this object. As its maximal power current (ICC) reaches 0.08mA, it is able to operate.
74ACT16373DLR Features
48-BSSOP (0.295, 7.50mm Width) package
74ACT series
16 Bits
74ACT16373 family
48 pin count
48 pins
5V power supplies
2 elements
74ACT16373DLR Applications
There are a lot of Texas Instruments 74ACT16373DLR Latches applications.
- Parallel data storage
- Pattern generators
- Clocks
- A/D converters
- Multistage ripple counting
- Communication systems
- Up-Down Johnson
- Flip-flops
- Automotive HEV/EV Powertrain
- PCs and Notebooks
