74ACT16373DLRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 48 |
| Weight | 600.301152mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Base Part Number | 74ACT16373 |
| Pin Count | 48 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 16 |
| Propagation Delay | 14.2 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 9.3 ns |
| Family | ACT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Control Type | ENABLE LOW/HIGH |
| Power Supply Current-Max (ICC) | 0.08mA |
| Number of Output Lines | 16 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 2.79mm |
| Length | 15.88mm |
| Width | 7.49mm |
| Thickness | 2.59mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74ACT16373DLRG4 Overview
48-BSSOP (0.295, 7.50mm Width) contains it. Tape & Reel (TR) is the packaging method. It uses Tri-State as the output. There is D-Type Transparent Latch logic type for this electrical device. Electronic components are mounted using the Surface Mount method. It operates with a supply voltage of 4.5V~5.5V. There is a temperature of -40°C~85°C at which the system operates. The 74ACT series is associated with this FPGA. Electronic parts with 16 bits are designed for this application. There are 48 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It belongs to 74ACT16373 family. The device is operated when the supply voltage is set to 5V. There are 48 pins on it. ACT is the family of this electronic device. 48 pins are used in its design. This electronic part is mounted in the way of Surface Mount. In this device, there are 2 ports. Subcategory FF/Latches contains this part. The system is powered by 5V sources. Based on its reliable performance, this device is appropriate for TR. Its 24mA output current allows for maximum design flexibility. In order to achieve high efficiency, the supply voltage should be kept at 5V. There are 16 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. Without external influences, it consumes 8μA of quiescent current. 2 elements are present in it. During operation, the maximum power current (ICC) that can be supplied for it to operate is set to 0.08mA.
74ACT16373DLRG4 Features
48-BSSOP (0.295, 7.50mm Width) package
74ACT series
16 Bits
74ACT16373 family
48 pin count
48 pins
5V power supplies
2 elements
74ACT16373DLRG4 Applications
There are a lot of Texas Instruments 74ACT16373DLRG4 Latches applications.
- Counter
- Parallel Input
- TV Set-top Boxes
- Display driver
- Buffer register
- Buffer/Storage Registers
- Automatic test equipment
- Pattern Generators
- Automotive Body Electronics
- Shift Registers
