banner_page

74ACT16373MTDX

D-Type, Latch 4.5V~5.5V 16 Bits Tri-State Latches 74ACT Series 74ACT16373 48-TFSOP (0.240, 6.10mm Width)


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-74ACT16373MTDX
  • Package: 48-TFSOP (0.240, 6.10mm Width)
  • Datasheet: PDF
  • Stock: 511
  • Description: D-Type, Latch 4.5V~5.5V 16 Bits Tri-State Latches 74ACT Series 74ACT16373 48-TFSOP (0.240, 6.10mm Width)(Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 48-TFSOP (0.240, 6.10mm Width)
Number of Pins 48
Supplier Device Package 48-TSSOP
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Series 74ACT
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Voltage - Supply 4.5V~5.5V
Base Part Number 74ACT16373
Output Type Tri-State
Operating Supply Voltage 5V
Number of Elements 2
Circuit 8:8
Polarity Non-Inverting
Number of Circuits 8
Max Supply Voltage 5.5V
Min Supply Voltage 4.5V
Number of Bits 16
Propagation Delay 7.9 ns
Turn On Delay Time 5.3 ns
Logic Function D-Type, Latch
Current - Output High, Low 24mA 24mA
Logic Type D-Type Transparent Latch
High Level Output Current -24mA
Low Level Output Current 24mA
Number of Input Lines 4
Independent Circuits 2
Number of Output Lines 16
Delay Time - Propagation 5.3ns
RoHS Status RoHS Compliant
Lead Free Lead Free

74ACT16373MTDX Overview


A package called 48-TFSOP (0.240, 6.10mm Width) contains it. Tape & Reel (TR) is the way in which it is packaged. In this configuration, the output is set to Tri-State. There is a logic type of D-Type Transparent Latch for this electrical device. Mounting this electronic component follows the Surface Mount method. The supply voltage of the device is 4.5V~5.5V. During operation, the temperature is set at -40°C~85°C. This FPGA is part of the 74ACT series. With this electronic part, there are 16 bits. This type belongs to the 74ACT16373 family. Designed with 48 pins, it is compatible with a wide range of devices. Surface Mount is the method used for mounting this electronic part. Electronic circuits comprise 4 input lines. If you want to achieve high efficiency, make sure the supply voltage is at 5V. It follows that 16 output lines are generated from the binary equivalent of the input line. This element consists of 2. 8 circuits are used to provide this superior level of flexibility. The low level output current is set to 24mA. The high level output current is set to -24mA. A temperature below 85°C should be used for operation. A temperature greater than -40°C should be used for operation. It is capable of providing a maximum supply voltage of 5.5V. A minimal voltage of 4.5V is needed to operate it.

74ACT16373MTDX Features


48-TFSOP (0.240, 6.10mm Width) package
74ACT series
16 Bits
74ACT16373 family
48 pins
2 elements

74ACT16373MTDX Applications


There are a lot of ON Semiconductor 74ACT16373MTDX Latches applications.

  • Data acquisition
  • Registers
  • Automotive Cluster
  • Pseudo-random code generators
  • Programmable binary
  • Serial Output Data Queuing
  • BCD counting
  • Automotive ADAS
  • Control circuits
  • Display

Write a review

Note: HTML is not translated!
    Bad           Good