74ACT16373SSCX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 48 |
| Supplier Device Package | 48-SSOP |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ACT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.5V~5.5V |
| Base Part Number | 74ACT16373 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 16 |
| Propagation Delay | 7.9 ns |
| Turn On Delay Time | 5.3 ns |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| High Level Output Current | -24mA |
| Low Level Output Current | 24mA |
| Number of Input Lines | 4 |
| Independent Circuits | 2 |
| Number of Output Lines | 16 |
| Delay Time - Propagation | 5.3ns |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74ACT16373SSCX Overview
It is embedded in the 48-BSSOP (0.295, 7.50mm Width) package. The package is in the form of Tape & Reel (TR). It uses the output configuration Tri-State. There is a logic type of D-Type Transparent Latch for this electrical device. This electronic part is mounted in the way of Surface Mount. A 4.5V~5.5V supply voltage is required to operate it. The operating temperature is -40°C~85°C. The 74ACT series contains FPGAs of this type. Electronic parts with 16 bits are designed for this application. 74ACT16373 is the family name of it. The device has 48 pins. Mounting this electronic component follows the Surface Mount method. Electronic circuits are represented by 4 input lines. For maximum efficiency, the supply voltage should be set to 5V. A binary equivalent of the input line is generated by the 16 output lines. A total of 2 elements are contained in it. The superior flexibility of this circuit can be attributed to the use of 8 circuits. There is 24mA output current at the low level. -24mA is set as the high level output current. Lower than 85°C is the recommended operating temperature. It is recommended that the operating temperature be higher than -40°C. 5.5V is the maximum voltage it supports. A minimal voltage of 4.5V is needed to operate it.
74ACT16373SSCX Features
48-BSSOP (0.295, 7.50mm Width) package
74ACT series
16 Bits
74ACT16373 family
48 pins
2 elements
74ACT16373SSCX Applications
There are a lot of ON Semiconductor 74ACT16373SSCX Latches applications.
- Instrumentation
- Registers
- Multistage ripple counting
- Bus system register with enable parallel lines at bus side
- Synchronous frequency dividers
- Hammer
- High-speed logic
- Communication systems
- OC-48 communication systems
- Parallel Input
