74ACT16373TTR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 48 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ACT163 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 8.5 ns |
| Turn On Delay Time | 5.3 ns |
| Family | ACT |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Prop. Delay@Nom-Sup | 9.9 ns |
| Number of Input Lines | 16 |
| Independent Circuits | 2 |
| Number of Output Lines | 3 |
| Width | 6.1mm |
| RoHS Status | ROHS3 Compliant |
74ACT16373TTR Overview
The 48-TFSOP (0.240, 6.10mm Width) package contains it. The package is in the form of Tape & Reel (TR). In this configuration, the output is set to Tri-State. This electrical device has a logic type of D-Type Transparent Latch. Electronic components are mounted using the Surface Mount method. A voltage of 4.5V~5.5V is used as the supply voltage for this device. There is -55°C~125°C operating temperature. This FPGA is part of the 74ACT series. 8 Bits are used in the design of this electronic part. A device with this design has 48 terminations. There is no doubt that it belongs to the family 74ACT163. A 5V voltage supply is required for operation. There are 48 pins attached to it. In the world of electronics, this electronic device belongs to the family of ACT. The device has 48 pins. A Surface Mount mounting method has been used for this electronic part. This device has 2 ports. This part can be found within the FF/Latches subcategory. 5.5V is the maximum voltage (Vsup) that can be supplied. There is 5V power supply for it. A supply voltage (Vsup) greater than 4.5V is required. It contains 16 input lines where electronic circuits are present. The reliability of this device makes it well suited to TAPE AND REEL. Regardless of the input line, the binary equivalent of the input line will be generated by the 3 output lines. The superior flexibility of this circuit can be attributed to the use of 8 circuits.
74ACT16373TTR Features
48-TFSOP (0.240, 6.10mm Width) package
74ACT series
8 Bits
74ACT163 family
48 pin count
48 pins
5V power supplies
74ACT16373TTR Applications
There are a lot of STMicroelectronics 74ACT16373TTR Latches applications.
- Counter
- Automotive Infotainment
- A/D converters
- Communication systems
- A/D and D/A conversion
- OC-48 communication systems
- Display
- Parallel data storage
- High-speed logic
- Buffer/Storage Registers
