74ACT16374DLG4
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 48 |
| Weight | 600.301152mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Frequency | 65MHz |
| Pin Count | 48 |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Current - Output | 24mA |
| Number of Bits | 16 |
| Propagation Delay | 10.9 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 8.8 ns |
| Family | ACT |
| Logic Function | D-Type, Flip-Flop |
| Logic IC Type | BUS DRIVER |
| Number of Bits per Element | 8 |
| High Level Output Current | -24mA |
| Low Level Output Current | 24mA |
| Number of Input Lines | 1 |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2.59mm |
| Length | 15.88mm |
| Width | 7.49mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74ACT16374DLG4 Overview
As a result, it is packaged as SSOP. Terminations are 48. An input voltage of 5Vpowers the D latch. This D flip flop belongs to the family of ACT. The electronic part is mounted in the way of Surface Mount. Basically, it is designed with a set of 48 pins. The clock edge trigger type for this device is Positive Edge. This device is part of the FF/Latchesbase part number family. The flip flop is designed with 16bits. To achieve this superior flexibility, 2 circuits are used. A power supply of 5Vis required to operate it. The flip flop contains 2ports. For high efficiency, the supply voltage should be set to 5V. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. A total of 1input lines have been provided. Quiescent current is consumed by the D latch in the amount of 8μA. -24mA is set as the high level output current. In the low level output current setting, the current is set to 24mA. Operating temperatures should be lower than 85°C. Ideally, the operating temperature should be greater than -40°C. The system operates with a minimum supply voltage of 4.5V. It supports a maximum supply voltage of 5.5V volts. This can be achieved at a frequency of 65MHz. BUS DRIVERis the logic IC it uses. The T flip flop is equipped with 2functions . A total of 48 pins are present on this device. The output current of 24mA makes it feature maximum design flexibility.
74ACT16374DLG4 Features
48 pins
16 Bits
5V power supplies
2 Functions
48 pin count
74ACT16374DLG4 Applications
There are a lot of Texas Instruments 74ACT16374DLG4 Flip Flops applications.
- Set-reset capability
- Supports Live Insertion
- Data transfer
- ESCC
- ESD protection
- Buffer registers
- Data Synchronizers
- Shift registers
- Memory
- Clock pulse
