74ACT16374SSC
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 48 |
| Supplier Device Package | 48-SSOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ACT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.5V~5.5V |
| Frequency | 71MHz |
| Base Part Number | 74ACT16374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 16 |
| Clock Frequency | 71MHz |
| Propagation Delay | 7.9 ns |
| Turn On Delay Time | 5.1 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 80μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 7.9ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -24mA |
| Input Capacitance | 4.5pF |
| Low Level Output Current | 24mA |
| Number of Input Lines | 2 |
| Number of Output Lines | 16 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74ACT16374SSC Overview
The flip flop is packaged in a case of 48-BSSOP (0.295, 7.50mm Width). D flip flop is included in the Tubepackage. T flip flop is configured with an output of Tri-State, Non-Inverted. It is configured with a trigger that uses Positive Edge. There is an electronic component mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 4.5V~5.5V. A temperature of -40°C~85°C TAis considered to be the operating temperature. The type of this D latch is D-Type. The 74ACTseries comprises this type of FPGA. Its output frequency should not exceed 71MHz. In total, it contains 2 elements. There is 80μA quiescent consumption. D latch belongs to the 74ACT16374 family. JK flip flop input capacitance is 4.5pF farads. Surface Mount mounts this electronic component. There are 48pins on it. This device's clock edge trigger type is Positive Edge. Flip flops designed with 16bits are used in this part. Despite its superior flexibility, it relies on 8 circuits to achieve it. If high efficiency is desired, the supply voltage should be kept at 5V. In order to operate, the chip has 16 output lines. As of now, there are 2input lines. A high level output current of -24mAis set. The low level output current is set to 24mA. Temperatures below 85°Care ideal for operating. It is recommended that the operating temperature is higher than -40°C. It operates with the minimal supply voltage of 4.5V. There is a maximum supply voltage of 5.5V. It is possible to achieve a frequency of 71MHz.
74ACT16374SSC Features
Tube package
74ACT series
48 pins
16 Bits
74ACT16374SSC Applications
There are a lot of ON Semiconductor 74ACT16374SSC Flip Flops applications.
- Count Modes
- Balanced 24 mA output drivers
- Balanced Propagation Delays
- Frequency division
- Set-reset capability
- Memory
- Buffered Clock
- Test & Measurement
- Dynamic threshold performance
- Registers
