74ACT16543DGGR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 56 |
| Weight | 252.792698mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Additional Feature | INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION; MASTER CONTROL FOR LATCH |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74ACT16543 |
| Pin Count | 56 |
| Number of Outputs | 16 |
| Output Type | 3-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Propagation Delay | 11.6 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 13.8 ns |
| Family | ACT |
| Logic Function | Inverting, Transceiver |
| Direction | Bidirectional |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | Transceiver, Non-Inverting |
| Number of Bits per Element | 8 |
| Control Type | INDEPENDENT CONTROL |
| Schmitt Trigger | No |
| Translation | N/A |
| Height | 1.2mm |
| Length | 14mm |
| Width | 6.1mm |
| Thickness | 1.15mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74ACT16543DGGR Overview
Logical driver uses a neat 56-TFSOP (0.240, 6.10mm Width) package. Tape & Reel (TR) external packaging. Available in Surface Mount. Voltage buffer adopts Transceiver, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 4.5V~5.5V. Qualified to operate within -40°C~85°C TA. The high and low logic state output current of logical driver is 24mA 24mA. Logical driver can deal with 3-State output (s). All of the 2 elements are put into use. Digital buffer is one of the 74ACT series devices. 56 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. ACT family part. 56 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 56 pins. Enhanced with 2 ports. The bus transceiver employs 8 bits for each element. You can search "74ACT16543" for other related electrical components. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under INDEPENDENT CONTROL control technology. In quiescent state, the electronic part uses 8μA. It is recommended to use a 5V power supply. It is generally sold in TR package. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. Logical driver features INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION; MASTER CONTROL FOR LATCH to better serve the need. It is sufficient to make 16 outputs.
74ACT16543DGGR Features
Bus Driver/Transceivers
INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION; MASTER CONTROL FOR LATCH
74ACT16543DGGR Applications
There are a lot of Texas Instruments 74ACT16543DGGR Buffers & Transceivers applications.
- Cell phones
- Structural bonding
- Automation systems
- Fiber distributed data interface (FDDI)
- Switching system
- Car alarm systems
- IP cameras
- Fast Ethernet
- Fiber-to-the-desktop
- Precision engineering measurement
