74ACT16823DL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 56 |
| Weight | 694.790113mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Termination | SMD/SMT |
| Type | D-Type |
| Additional Feature | WITH CLEAR AND CLOCK ENABLE |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74ACT16823 |
| Function | Master Reset |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 1 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 18 |
| Clock Frequency | 90MHz |
| Propagation Delay | 12.9 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 7.5 ns |
| Family | ACT |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 9 |
| Max Propagation Delay @ V, Max CL | 11.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Power Supply Current-Max (ICC) | 0.08mA |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Height | 2.79mm |
| Length | 18.41mm |
| Width | 7.49mm |
| Thickness | 2.59mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74ACT16823DL Overview
It is embeded in 56-BSSOP (0.295, 7.50mm Width) case. D flip flop is embedded in the Tube package. It is configured with Tri-State, Non-Invertedas an output. This trigger uses the value Positive Edge. There is an electric part mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis required for its operation. A temperature of -40°C~85°C TAis considered to be the operating temperature. This electronic flip flop is of type D-Type. FPGAs belonging to the 74ACTseries contain this type of chip. You should not exceed 90MHzin its output frequency. D latch consists of 2 elements. The number of terminations is 56. The 74ACT16823family includes it. It is powered by a voltage of 5V . A 3pFfarad input capacitance is provided by this T flip flop. ACTis the family of this D flip flop. Electronic part Surface Mountis mounted in the way. A total of 56pins are provided on this board. This device's clock edge trigger type is Positive Edge. This device is part of the FF/Latchesbase part number family. An electronic part with 18bits has been designed. In order to achieve its superior flexibility, 1 circuits are used. The D latch operates on 5V volts. This flip flop has a total of 2ports. A high level of efficiency can be achieved by maintaining the supply voltage at 5V. The 24mA output current allows it to be designed with the greatest amount of flexibility. In order to operate, the chip has 3 output lines. It consumes 8μA of quiescent current without being affected by external factors. Additionally, you may refer to the additional WITH CLEAR AND CLOCK ENABLE of the electronic flip flop.
74ACT16823DL Features
Tube package
74ACT series
56 pins
18 Bits
5V power supplies
74ACT16823DL Applications
There are a lot of Texas Instruments 74ACT16823DL Flip Flops applications.
- Test & Measurement
- Load Control
- ATE
- Frequency Divider circuits
- Individual Asynchronous Resets
- ESCC
- Buffered Clock
- Patented noise
- Balanced 24 mA output drivers
- Latch
