74ACT16823DLR
| Parameters | |
|---|---|
| Clock Frequency | 90MHz |
| Propagation Delay | 12.9 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 7.5 ns |
| Family | ACT |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 9 |
| Max Propagation Delay @ V, Max CL | 11.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Power Supply Current-Max (ICC) | 0.08mA |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Height | 2.79mm |
| Length | 18.41mm |
| Width | 7.49mm |
| Thickness | 2.59mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 56 |
| Weight | 694.790113mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Type | D-Type |
| Additional Feature | WITH CLEAR AND CLOCK ENABLE |
| Subcategory | Bus Driver/Transceiver |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74ACT16823 |
| Function | Master Reset |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 1 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 18 |
74ACT16823DLR Overview
The item is packaged in 56-BSSOP (0.295, 7.50mm Width)cases. Package Cut Tape (CT)embeds it. It is configured with Tri-State, Non-Invertedas an output. The trigger configured with it uses Positive Edge. Surface Mountis occupied by this electronic component. A supply voltage of 4.5V~5.5V is required for operation. The operating temperature is -40°C~85°C TA. This D latch has the type D-Type. In terms of FPGAs, it belongs to the 74ACT series. It should not exceed 90MHzin its output frequency. A total of 2elements are present in it. A total of 56terminations have been recorded. JK flip flop belongs to 74ACT16823 family. The D flip flop is powered by a voltage of 5V . Its input capacitance is 3pFfarads. Devices in the ACTfamily are electronic devices. There is an electronic part that is mounted in the way of Surface Mount. With its 56pins, it is designed to work with most electronic flip flops. A Positive Edgeclock edge trigger is used in this device. This part is included in Bus Driver/Transceiver. There are 18bits in this flip flop. Its flexibility is enhanced by 1 circuits. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TR. A total of 5V power supplies are needed to run it. The D flip flop has no ports embedded. High efficiency requires the supply voltage to be maintained at 5V. With an output current of 24mA, this device offers maximum design flexibility. It is designed with 3 output lines. In terms of quiescent current, it consumes 8μA . In addition, you can refer to the additinal WITH CLEAR AND CLOCK ENABLE of the D latch.
74ACT16823DLR Features
Cut Tape (CT) package
74ACT series
56 pins
18 Bits
5V power supplies
74ACT16823DLR Applications
There are a lot of Texas Instruments 74ACT16823DLR Flip Flops applications.
- Functionally equivalent to the MC10/100EL29
- Guaranteed simultaneous switching noise level
- QML qualified product
- Test & Measurement
- Pattern generators
- Storage registers
- Supports Live Insertion
- Cold spare funcion
- 2 – Bit synchronous counter
- Shift registers
