banner_page

74ACT16841DLG4

D-Type, Latch 4.5V~5.5V 10 Bits Tri-State Latches 74ACT Series 74ACT16841 56 Pins DUAL CMOS 56-BSSOP (0.295, 7.50mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-74ACT16841DLG4
  • Package: 56-BSSOP (0.295, 7.50mm Width)
  • Datasheet: -
  • Stock: 949
  • Description: D-Type, Latch 4.5V~5.5V 10 Bits Tri-State Latches 74ACT Series 74ACT16841 56 Pins DUAL CMOS 56-BSSOP (0.295, 7.50mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 week ago)
Contact Plating Gold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 56-BSSOP (0.295, 7.50mm Width)
Number of Pins 56
Weight 694.790113mg
Operating Temperature -40°C~85°C
Packaging Tube
Series 74ACT
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 56
Subcategory FF/Latches
Technology CMOS
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 5V
Terminal Pitch 0.635mm
Base Part Number 74ACT16841
Pin Count 56
Output Type Tri-State
Operating Supply Voltage 5V
Circuit 10:10
Polarity Non-Inverting
Power Supplies 5V
Load Capacitance 50pF
Number of Ports 2
Output Current 24mA
Number of Bits 10
Propagation Delay 13.7 ns
Quiescent Current 8μA
Turn On Delay Time 7.7 ns
Family ACT
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Current - Output High, Low 24mA 24mA
Logic Type D-Type Transparent Latch
Control Type ENABLE LOW/HIGH
Power Supply Current-Max (ICC) 0.08mA
Number of Input Lines 20
Independent Circuits 2
Translation N/A
Height 2.79mm
Length 18.41mm
Width 7.49mm
Thickness 2.59mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

74ACT16841DLG4 Overview


In the package 56-BSSOP (0.295, 7.50mm Width), it can be found. As a result, it has a packaging of Tube. It uses the output configuration Tri-State. There is D-Type Transparent Latch logic type for this electrical device. Based on the way of Surface Mount, this electronic part is mounted. A 4.5V~5.5V supply voltage is required to operate it. The temperature at which the machine is operating is -40°C~85°C. The 74ACT series of FPGAs is the one this FPGA belongs to. Electronic parts with 10 bits are designed for this application. In this device, there are 56 terminations that have been designed. This type belongs to the 74ACT16841 family. The device is operated when the supply voltage is set to 5V. The device is equipped with 56 pins. ACT is the family name of this electronic device. 56 pins are used in its design. The electronic part is mounted in a way that corresponds to Surface Mount. As far as ports are concerned, this device has 2 ports. This part can be found within the FF/Latches subcategory. There are 5V power supplies required for this machine to operate. Electronic circuits are represented by 20 input lines. With an output current of 24mA, it is highly flexible in terms of design. The supply voltage should be maintained at 5V for high efficiency. Without external influences, it consumes 8μA quiescent current. In order for the device to operate at its maximum power, the maximum power current (ICC) of 0.08mA is needed for operation.

74ACT16841DLG4 Features


56-BSSOP (0.295, 7.50mm Width) package
74ACT series
10 Bits
74ACT16841 family
56 pin count
56 pins
5V power supplies

74ACT16841DLG4 Applications


There are a lot of Texas Instruments 74ACT16841DLG4 Latches applications.

  • Stacked or Push-Down Registers
  • Instrumentation
  • Automotive HEV/EV Powertrain
  • Shift right register
  • Automatic test equipment
  • Up/down difference counting
  • Shift register
  • Phase comparator
  • Control circuits
  • A/D and D/A conversion

Write a review

Note: HTML is not translated!
    Bad           Good