74ACT16841DLR
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 56 |
| Weight | 694.790113mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ACT16841 |
| Pin Count | 56 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Circuit | 10:10 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 20 |
| Propagation Delay | 11 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 7.7 ns |
| Family | ACT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Number of Output Lines | 20 |
| Length | 18.415mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74ACT16841DLR Overview
The 56-BSSOP (0.295, 7.50mm Width) package contains it. A package of Tape & Reel (TR) has been used. It uses the output configuration Tri-State. There is D-Type Transparent Latch logic type for this electrical device. Based on the way of Surface Mount, this electronic part is mounted. With a supply voltage of 4.5V~5.5V, it operates. A temperature of -40°C~85°C is set as the operating temperature. The 74ACT series is associated with this FPGA. The electronic part in this image has 20 bits. In this device, there are 56 terminations. 74ACT16841 is the family name of it. In order to function, the supply voltage should be set to 5V. With 56 pins, it is equipped. ACT is the family of this electronic device. There are 56 pins on it. Surface Mount is used to mount this electronic part. In this device, there is a total of 2 ports available for use. Subcategory FF/Latches contains this part. The device is powered by 5V power supplies. Based on its reliable performance, this device is appropriate for TAPE AND REEL. With 24mA, maximum design flexibility is ensured. High efficiency requires a supply voltage of 5V. A binary equivalent of the input line is generated by the 20 output lines. Aquiescent current is consumed by 8μA without being affected by external forces. It consists of 2 elements.
74ACT16841DLR Features
56-BSSOP (0.295, 7.50mm Width) package
74ACT series
20 Bits
74ACT16841 family
56 pin count
56 pins
5V power supplies
2 elements
74ACT16841DLR Applications
There are a lot of Texas Instruments 74ACT16841DLR Latches applications.
- Address register
- Motor Drives
- Storage
- Relay
- Shift left register
- Double bus register system
- Parallel data storage
- Audio and video switching
- Serial Output Data Queuing
- Buffer/Storage Registers
