74ACT174SC
| Parameters | |
|---|---|
| Supplier Device Package | 16-SOIC |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2000 |
| Series | 74ACT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.5V~5.5V |
| Frequency | 100MHz |
| Base Part Number | 74ACT174 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 7 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Output Current | 24mA |
| Number of Bits | 6 |
| Clock Frequency | 200MHz |
| Propagation Delay | 12.5 ns |
| Turn On Delay Time | 7 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 40μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 6 |
| Max Frequency | 140MHz |
| Max Propagation Delay @ V, Max CL | 10.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -24mA |
| Input Capacitance | 4.5pF |
| Low Level Output Current | 24mA |
| Number of Input Lines | 3 |
| Number of Output Lines | 6 |
| Clock Edge Trigger Type | Positive Edge |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
74ACT174SC Overview
The package is in the form of 16-SOIC (0.154, 3.90mm Width). You can find it in the Tubepackage. The output it is configured with uses Non-Inverted. It is configured with the trigger Positive Edge. This electronic part is mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis required for its operation. A temperature of -40°C~85°C TAis considered to be the operating temperature. This logic flip flop is classified as type D-Type. JK flip flop belongs to the 74ACTseries of FPGAs. A frequency of 200MHzshould not be exceeded by its output. D latch consists of 1 elements. As a result, it consumes 40μA quiescent current and is not affected by external forces. The 74ACT174 family contains this object. A 4.5pFfarad input capacitance is provided by this T flip flop. There is an electronic part that is mounted in the way of Surface Mount. A total of 16pins are provided on this board. There is a clock edge trigger type of Positive Edgeon this device. There are 6bits in this flip flop. The superior flexibility is achieved through the use of 7 circuits. For high efficiency, the supply voltage should be set to 5V. With a current output of 24mA , it offers maximum design flexibility. The JK flip flop is with 6 output lines to operate. This input has 3lines in it. High level output current is set to -24mA. It is set to 24mAfor low level output current. Temperatures below 85°Care ideal for operating. In order for the system to operate properly, the temperature should be higher than -40°C. The RS flip flop is designed to operate with a minimal supply voltage of 4.5VV. In this case, it supports a maximum supply voltage of 5.5V. It is possible to obtain a frequency of 100MHz.
74ACT174SC Features
Tube package
74ACT series
16 pins
6 Bits
74ACT174SC Applications
There are a lot of ON Semiconductor 74ACT174SC Flip Flops applications.
- Set-reset capability
- Matched Rise and Fall
- Shift registers
- Clock pulse
- Modulo – n – counter
- Supports Live Insertion
- Power down protection
- Single Up Count-Control Line
- Differential Individual
- Synchronous counter
