74ACT174SCX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Supplier Device Package | 16-SOIC |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ACT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.5V~5.5V |
| Frequency | 140MHz |
| Base Part Number | 74ACT174 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 7 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 6 |
| Clock Frequency | 200MHz |
| Propagation Delay | 12.5 ns |
| Turn On Delay Time | 7 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 40μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 6 |
| Max Frequency | 140MHz |
| Max Propagation Delay @ V, Max CL | 10.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -24mA |
| Input Capacitance | 4.5pF |
| Low Level Output Current | 24mA |
| Number of Input Lines | 3 |
| Number of Output Lines | 6 |
| Clock Edge Trigger Type | Positive Edge |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74ACT174SCX Overview
The item is packaged in 16-SOIC (0.154, 3.90mm Width)cases. You can find it in the Tape & Reel (TR)package. There is a Non-Invertedoutput configured with it. In the configuration of the trigger, Positive Edgeis used. Surface Mountis positioned in the way of this electronic part. A voltage of 4.5V~5.5Vis required for its operation. A temperature of -40°C~85°C TAis considered to be the operating temperature. Logic flip flops of this type are classified as D-Type. FPGAs belonging to the 74ACTseries contain this type of chip. Its output frequency should not exceed 200MHz. In total, there are 1 elements. During its operation, it consumes 40μA quiescent energy. The 74ACT174 family contains it. This JK flip flop has a 4.5pFfarad input capacitance. There is an electronic part mounted in the way of Surface Mount. This board is designed with 16pins on it. This device has Positive Edgeas its clock edge trigger type. The design is based on 6bits. The superior flexibility of this product is achieved by using 7 circuits. The supply voltage should be maintained at 5V for high efficiency. There are 6 output lines on it. This input has 3lines. -24mAis the output current at high level. The low level output current is set to 24mA. Operating temperatures should be lower than 85°C. It should be higher than -40°Cwhen the system is operating. Normally, it operates with a voltage of 4.5VV as its minimum supply voltage. There is a maximum supply voltage of 5.5V. This frequency can be achieved 140MHz.
74ACT174SCX Features
Tape & Reel (TR) package
74ACT series
16 pins
6 Bits
74ACT174SCX Applications
There are a lot of ON Semiconductor 74ACT174SCX Flip Flops applications.
- Data Synchronizers
- Clock pulse
- ESD protection
- Power down protection
- Test & Measurement
- Circuit Design
- Dynamic threshold performance
- Asynchronous counter
- QML qualified product
- Storage registers
