74ACT175SJ
| Parameters | |
|---|---|
| Current - Output High, Low | 24mA 24mA |
| Max Propagation Delay @ V, Max CL | 11ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Number of Output Lines | 2 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ACT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Voltage - Supply | 4.5V~5.5V |
| Base Part Number | 74ACT175 |
| Function | Master Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 4 |
| Clock Frequency | 236MHz |
| Propagation Delay | 11 ns |
| Turn On Delay Time | 6 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 40μA |
74ACT175SJ Overview
The flip flop is packaged in a case of 16-SOIC (0.209, 5.30mm Width). D flip flop is included in the Tubepackage. Differentialis the output configured for it. In the configuration of the trigger, Positive Edgeis used. Surface Mountis in the way of this electric part. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. It is operating at a temperature of -40°C~85°C TA. This logic flip flop is classified as type D-Type. In FPGA terms, D flip flop is a type of 74ACTseries FPGA. You should not exceed 236MHzin the output frequency of the device. In total, there are 1 elements. There is a consumption of 40μAof quiescent energy. D latch belongs to the 74ACT175 family. This T flip flop has a capacitance of 4.5pF farads at the input. It is mounted by the way of Surface Mount. Basically, it is designed with a set of 16 pins. This device's clock edge trigger type is Positive Edge. To achieve this superior flexibility, 4 circuits are used. Optimal efficiency requires a supply voltage of 5V. It has 2 output lines to operate.
74ACT175SJ Features
Tube package
74ACT series
16 pins
74ACT175SJ Applications
There are a lot of ON Semiconductor 74ACT175SJ Flip Flops applications.
- Count Modes
- Frequency division
- Common Clocks
- Frequency Divider circuits
- Digital electronics systems
- Modulo – n – counter
- Synchronous counter
- ESCC
- Storage Registers
- Single Down Count-Control Line
