banner_page

74ACT253SCX

4.5V~5.5V 16 Pin 74ACT253 Signal switch74ACT Series 2 OutputsMin 4.5V VMax 5.5V V


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-74ACT253SCX
  • Package: 16-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 536
  • Description: 4.5V~5.5V 16 Pin 74ACT253 Signal switch74ACT Series 2 OutputsMin 4.5V VMax 5.5V V(Kg)

Details

Tags

Parameters
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Series 74ACT
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Type Multiplexer
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Voltage - Supply 4.5V~5.5V
Base Part Number 74ACT253
Number of Outputs 2
Operating Supply Voltage 5V
Circuit 2 x 4:1
Max Supply Voltage 5.5V
Min Supply Voltage 4.5V
Number of Bits 2
Throw Configuration 4PST
Propagation Delay 11 ns
Logic Function Multiplexer, Mux
Number of Inputs 8
Current - Output High, Low 24mA 24mA
Supply Type Single
High Level Output Current 24mA
Low Level Output Current 24mA
Number of Input Lines 4
Voltage Supply Source Single Supply
Independent Circuits 1
Number of Output Lines 3
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Lead Free
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-SOIC (0.154, 3.90mm Width)
Number of Pins 16
Supplier Device Package 16-SOIC

74ACT253SCX Overview


Due to the lack of space on the board, digital switch is provided in the 16-SOIC (0.154, 3.90mm Width).The package is in the form of Tape & Reel (TR).For mounting, digital switch ic uses the method Surface Mount.In the multiplexers, the analog IC Multiplexer is used.The operating temperature of -40°C~85°C will not be susceptible to external factors.Designers have greater flexibility using digital controlled switch when it works with 4.5V~5.5V voltage.As a member of 74ACT series, the multiplexers can be used for a wide range of applications.There is a base part number 74ACT253 that can be used to locate signal switch's related components as well.There is a supply type of Single employed as part of this supply.A total of 16 pins are configured on this board.The multiplexer ic is mounted in the direction of Surface Mount.There are 2 bits signal multiplexer provides.For the turn signal switch's operation, there are 2 outputs.The performance of the multiplexers can be reliably maintained at a voltage of 5V.It has 8 inputs.A voltage level can be inserted into the 4 input lines of multiplexers.As a signal source, there are 3 output lines.There is no problem with operating this signal switch at the maximum temperature of 85°C.In order to maintain a minimal operating temperature, the temperature of the multiplexer should be set to -40°C.Upon compliance with the applicable device specifications, the device will operate at the maximum supply voltage of 5.5V.Typical device specifications specify a voltage supply of 4.5V for the digital swith.

74ACT253SCX Features


Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 5V
4 input lines
3 output lines

74ACT253SCX Applications


There are a lot of ON Semiconductor 74ACT253SCX Signal Switches / Multiplexers / Decoders applications.

  • Time division multiplexing system
  • VGA
  • Enabling different functions units in microprocessor instruction decoding
  • Used to connect a single source to multiple destinations
  • To select different task for memory in microprocessor memory systems
  • Combinational circuit
  • Make full adder
  • Data bus control
  • Solenoid cooling fan
  • Frequency multiplexing system

Write a review

Note: HTML is not translated!
    Bad           Good