74ACT273PC
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Supplier Device Package | 20-PDIP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ACT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Voltage - Supply | 4.5V~5.5V |
| Base Part Number | 74ACT273 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Clock Frequency | 189MHz |
| Current - Quiescent (Iq) | 40μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 8.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
74ACT273PC Overview
The flip flop is packaged in 20-DIP (0.300, 7.62mm). D flip flop is included in the Tubepackage. T flip flop is configured with an output of Non-Inverted. It is configured with a trigger that uses a value of Positive Edge. Through Holeis in the way of this electric part. It operates with a supply voltage of 4.5V~5.5V. Temperature is set to -40°C~85°C TA. D-Typeis the type of this D latch. In FPGA terms, D flip flop is a type of 74ACTseries FPGA. Its output frequency should not exceed 189MHz. A total of 1 elements are present. This process consumes 40μA quiescents. The 74ACT273 family contains it. This T flip flop has a capacitance of 4.5pF farads at the input.
74ACT273PC Features
Tube package
74ACT series
74ACT273PC Applications
There are a lot of ON Semiconductor 74ACT273PC Flip Flops applications.
- Bounce elimination switch
- Supports Live Insertion
- Frequency division
- Computers
- Storage Registers
- Pattern generators
- Counters
- Latch
- ESCC
- ESD protection
