74ACT273SJX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Supplier Device Package | 20-SOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ACT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.5V~5.5V |
| Frequency | 189MHz |
| Base Part Number | 74ACT273 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 8 |
| Clock Frequency | 189MHz |
| Propagation Delay | 8.5 ns |
| Turn On Delay Time | 6.5 ns |
| Logic Function | Flip-Flop |
| Current - Quiescent (Iq) | 40μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 8.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -24mA |
| Input Capacitance | 4.5pF |
| Low Level Output Current | 24mA |
| Number of Input Lines | 8 |
| Number of Output Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74ACT273SJX Overview
In the form of 20-SOIC (0.209, 5.30mm Width), it has been packaged. The package Tape & Reel (TR)contains it. It is configured with Non-Invertedas an output. In the configuration of the trigger, Positive Edgeis used. There is an electrical part that is mounted in the way of Surface Mount. It operates with a supply voltage of 4.5V~5.5V. It is operating at a temperature of -40°C~85°C TA. It is an electronic flip flop with the type D-Type. In terms of FPGAs, it belongs to the 74ACT series. You should not exceed 189MHzin its output frequency. A total of 1elements are contained within it. As a result, it consumes 40μA of quiescent current without being affected by external factors. Members of the 74ACT273family make up this object. The input capacitance of this T flip flop is 4.5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. There is an electronic component mounted in the way of Surface Mount. The 20pins are designed into the board. This device exhibits a clock edge trigger type of Positive Edge. An electronic part designed with 8bits is used in this application. Due to its superior flexibility, it uses 8 circuits. For high efficiency, the supply voltage should be kept at 5V. It is designed with 8 output lines. A total of 8input lines have been provided. A -24mAvalue is set for the high level output current. 24mA is the low level output current. A temperature below 85°Cshould be used for operation. If the operating temperature is higher than -40°C, the system should operate properly. In order for it to operate, a supply voltage of 4.5Vis required. The maximum supply voltage supported by the flip flop is 5.5V. It is possible to obtain a frequency of 189MHz.
74ACT273SJX Features
Tape & Reel (TR) package
74ACT series
20 pins
8 Bits
74ACT273SJX Applications
There are a lot of ON Semiconductor 74ACT273SJX Flip Flops applications.
- Data Synchronizers
- Individual Asynchronous Resets
- Storage Registers
- Digital electronics systems
- Pattern generators
- Balanced 24 mA output drivers
- Counters
- Asynchronous counter
- Control circuits
- Consumer
