74ACT273TTR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ACT273 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Clock Frequency | 190MHz |
| Propagation Delay | 8.5 ns |
| Turn On Delay Time | 4 ns |
| Family | ACT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 24mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 8.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Clock Edge Trigger Type | Positive Edge |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74ACT273TTR Overview
It is packaged in the way of 20-TSSOP (0.173, 4.40mm Width). It is included in the package Tape & Reel (TR). T flip flop uses Non-Invertedas the output. Positive Edgeis the trigger it is configured with. Surface Mountmounts this electrical part. The JK flip flop operates at 4.5V~5.5Vvolts. Temperature is set to -55°C~125°C TA. A flip flop of this type is classified as a D-Type. The 74ACTseries comprises this type of FPGA. A frequency of 190MHzshould not be exceeded by its output. D latch consists of 1 elements. This process consumes 4μA quiescents. There have been 20 terminations. The object belongs to the 74ACT273 family. The D flip flop is powered by a voltage of 5V . The input capacitance of this JK flip flopis 4pF farads. Electronic devices of this type belong to the ACTfamily. The electronic part is mounted in the way of Surface Mount. A total of 20pins are provided on this board. This device exhibits a clock edge trigger type of Positive Edge. It is included in FF/Latches. An electronic part with 8bits has been designed. Despite its superior flexibility, it relies on 8 circuits to achieve it. As a result of its reliability, this D flip flop is ideally suited for TAPE AND REEL. The D latch operates on 5V volts. High efficiency requires the supply voltage to be maintained at 5V.
74ACT273TTR Features
Tape & Reel (TR) package
74ACT series
20 pins
8 Bits
5V power supplies
74ACT273TTR Applications
There are a lot of STMicroelectronics 74ACT273TTR Flip Flops applications.
- Test & Measurement
- Latch-up performance
- Memory
- ESD performance
- Guaranteed simultaneous switching noise level
- CMOS Process
- Load Control
- Circuit Design
- Bounce elimination switch
- Computing
