banner_page

74ACT373MTC

D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74ACT Series 74ACT373 20-TSSOP (0.173, 4.40mm Width)


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-74ACT373MTC
  • Package: 20-TSSOP (0.173, 4.40mm Width)
  • Datasheet: PDF
  • Stock: 985
  • Description: D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74ACT Series 74ACT373 20-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-TSSOP (0.173, 4.40mm Width)
Number of Pins 20
Supplier Device Package 20-TSSOP
Operating Temperature -40°C~85°C
Packaging Tube
Series 74ACT
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Voltage - Supply 4.5V~5.5V
Base Part Number 74ACT373
Output Type Tri-State
Operating Supply Voltage 5V
Number of Elements 1
Circuit 8:8
Polarity Non-Inverting
Number of Circuits 8
Max Supply Voltage 5.5V
Min Supply Voltage 4.5V
Number of Bits 8
Propagation Delay 10 ns
Turn On Delay Time 8 ns
Logic Function D-Type, Latch
Current - Output High, Low 24mA 24mA
Logic Type D-Type Transparent Latch
High Level Output Current -24mA
Low Level Output Current 24mA
Number of Input Lines 2
Independent Circuits 1
Number of Output Lines 3
Delay Time - Propagation 8ns
RoHS Status RoHS Compliant
Lead Free Lead Free

74ACT373MTC Overview


There is an embedded version of it in package 20-TSSOP (0.173, 4.40mm Width). It is packaged in the way of Tube. It uses the output configuration Tri-State. There is D-Type Transparent Latch logic type for this electrical device. Mounting this electronic component follows the Surface Mount method. The voltage supply is 4.5V~5.5V. There is -40°C~85°C operating temperature. An FPGA in this series belongs to the 74ACT family. It is designed with 8 bits. The family it belongs to is 74ACT373. The 20 pins are designed into it. This electronic part is mounted in the way of Surface Mount. Input Lines consist of electronic circuits, and there are 2. A high level of efficiency is achieved by maintaining the supply voltage at 5V. It follows that 3 output lines are generated from the binary equivalent of the input line. In total, it has 1 elements. In order to achieve its superior flexibility, 8 circuits are used. It has been set to 24mA for the low level output current. In the high level output current, the value is set to -24mA. Ideally, the operating temperature should be lower than 85°C. The operating temperature should be higher than -40°C. It is capable of providing a maximum supply voltage of 5.5V. This device requires a minimum voltage of 4.5V.

74ACT373MTC Features


20-TSSOP (0.173, 4.40mm Width) package
74ACT series
8 Bits
74ACT373 family
20 pins
1 elements

74ACT373MTC Applications


There are a lot of ON Semiconductor 74ACT373MTC Latches applications.

  • Counters
  • Counter control
  • Network Switches
  • A/D and D/A conversion
  • Hammer Device Information
  • Digital bus buffer
  • OC-48 communication systems
  • Parallel data synchronization
  • Clocks
  • Up/down difference counting

Write a review

Note: HTML is not translated!
    Bad           Good