Parameters |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
20-DIP (0.300, 7.62mm) |
Number of Pins |
20 |
Supplier Device Package |
20-PDIP |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Series |
74ACT |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Voltage - Supply |
4.5V~5.5V |
Base Part Number |
74ACT373 |
Output Type |
Tri-State |
Operating Supply Voltage |
5V |
Number of Elements |
1 |
Circuit |
8:8 |
Polarity |
Non-Inverting |
Number of Circuits |
8 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
4.5V |
Output Current |
24mA |
Number of Bits |
8 |
Propagation Delay |
12.5 ns |
Turn On Delay Time |
8 ns |
Logic Function |
D-Type, Latch |
Current - Output High, Low |
24mA 24mA |
Logic Type |
D-Type Transparent Latch |
Number of Gates |
8 |
High Level Output Current |
-24mA |
Low Level Output Current |
24mA |
Number of Input Lines |
2 |
Independent Circuits |
1 |
Number of Output Lines |
3 |
Delay Time - Propagation |
8ns |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
74ACT373PC Overview
The package in which it is embedded is named 20-DIP (0.300, 7.62mm). A package of Tube has been used. It uses Tri-State as the output. There is a logic type of D-Type Transparent Latch for this electrical device. This electronic part is mounted in the way of Through Hole. The voltage supply is 4.5V~5.5V. There is a temperature of -40°C~85°C at which the system operates. An FPGA in this series belongs to the 74ACT family. The design of this electronic part contains 8 bits. It is a member of the 74ACT373 family. The 20 pins are designed into it. The electronic part is mounted using the Through Hole method. An electronic circuit can be found on 2 input lines. The 24mA output current gives it maximum design flexibility. If you want to achieve high efficiency, make sure the supply voltage is at 5V. 3 output lines generate the binary equivalent of the input lines. In total, it has 1 elements. In order to achieve its superior flexibility, 8 circuits are used. It is set to zero for the low level output current. There is -24mA output current at the high level. The operating temperature should be lower than 85°C. It is recommended to operate at a temperature higher than -40°C. 5.5V is the maximum voltage it supports. The minimal supply voltage is 4.5V.
74ACT373PC Features
20-DIP (0.300, 7.62mm) package
74ACT series
8 Bits
74ACT373 family
20 pins
1 elements
74ACT373PC Applications
There are a lot of ON Semiconductor 74ACT373PC Latches applications.
- Synchronous frequency dividers
- Buffer Storage
- Frequency dividing
- Double bus register system
- Audio and video switching
- Shift register
- Shift right with parallel loading
- Counter timers
- Shift left with parallel loading
- Hammer Device Information