banner_page

74ACT373SJX

D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74ACT Series 74ACT373 20-SOIC (0.209, 5.30mm Width)


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-74ACT373SJX
  • Package: 20-SOIC (0.209, 5.30mm Width)
  • Datasheet: PDF
  • Stock: 224
  • Description: D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74ACT Series 74ACT373 20-SOIC (0.209, 5.30mm Width)(Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-SOIC (0.209, 5.30mm Width)
Number of Pins 20
Supplier Device Package 20-SOP
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Published 1999
Series 74ACT
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Voltage - Supply 4.5V~5.5V
Base Part Number 74ACT373
Output Type Tri-State
Operating Supply Voltage 5V
Number of Elements 1
Circuit 8:8
Polarity Non-Inverting
Number of Circuits 8
Max Supply Voltage 5.5V
Min Supply Voltage 4.5V
Number of Bits 8
Propagation Delay 10 ns
Turn On Delay Time 8 ns
Logic Function D-Type, Latch
Current - Output High, Low 24mA 24mA
Logic Type D-Type Transparent Latch
High Level Output Current -24mA
Low Level Output Current 24mA
Number of Input Lines 2
Independent Circuits 1
Number of Output Lines 3
Delay Time - Propagation 8ns
RoHS Status RoHS Compliant
Lead Free Lead Free

74ACT373SJX Overview


In the 20-SOIC (0.209, 5.30mm Width) package, it can be found as an embedded module. The package is in the form of Tape & Reel (TR). Tri-State is used for the output it is configured with. This electrical device has a logic type of D-Type Transparent Latch. Electronic parts are mounted in accordance with Surface Mount. A 4.5V~5.5V supply voltage is required to operate it. A temperature of -40°C~85°C is set as the operating temperature. It is a type of FPGA belonging to the 74ACT series. With this electronic part, there are 8 bits. There is no doubt that it belongs to the family 74ACT373. The 20 pins are designed into it. It is mounted according to the Surface Mount method. There are 2 input lines in which electronic circuits are present. High efficiency requires a supply voltage of 5V. 3 output lines provide binary equivalents of input lines. A total of 1 elements make up this object. The superior flexibility of this circuit can be attributed to the use of 8 circuits. 24mA represents the low level output current. The high level output current is set to -24mA. A temperature below 85°C should be used for operation. A temperature greater than -40°C should be used as the operating temperature. There is a maximum voltage of 5.5V supported. The minimal voltage for operation is 4.5V.

74ACT373SJX Features


20-SOIC (0.209, 5.30mm Width) package
74ACT series
8 Bits
74ACT373 family
20 pins
1 elements

74ACT373SJX Applications


There are a lot of ON Semiconductor 74ACT373SJX Latches applications.

  • Serial Input
  • Hammer Device Information
  • Shift Registers
  • General-Purpose Register
  • Decade counting
  • Relay
  • Instrumentation
  • Hammer
  • Frequency dividing
  • Buffer register

Write a review

Note: HTML is not translated!
    Bad           Good