74ACT373TTR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ACT373 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 6 ns |
| Family | ACT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
74ACT373TTR Overview
There is an embedded version of it in package 20-TSSOP (0.173, 4.40mm Width). As a result, it has a packaging of Tape & Reel (TR). In this configuration, the output is set to Tri-State. A D-Type Transparent Latch logic type is used in this electrical device. A Surface Mount mount is used for mounting this electronic part. It operates with a supply voltage of 4.5V~5.5V. The operating temperature is -55°C~125°C. It is a type of FPGA belonging to the 74ACT series. The electronic part in this image has 8 bits. In this device, there are 20 terminations that have been designed. This type belongs to the 74ACT373 family. In order to function, the supply voltage should be set to 5V. 20 pins are available on it. It is a member of the ACT family of electronic devices. The pin configuration of the device is 20. It is mounted according to the Surface Mount method. This device has a total of 2 ports. There is a subcategory of FF/Latches for this part. Vsup reaches 5.5V as the maximum supply voltage. There is 5V power supply for it. If the supply voltage (Vsup) is greater than 4.5V, then the device is working correctly. There are 8 input lines in which electronic circuits are present. This device is well suited for TAPE AND REEL based on its reliable performance.
74ACT373TTR Features
20-TSSOP (0.173, 4.40mm Width) package
74ACT series
8 Bits
74ACT373 family
20 pin count
20 pins
5V power supplies
74ACT373TTR Applications
There are a lot of STMicroelectronics 74ACT373TTR Latches applications.
- Serial Output Register
- Display
- Decade counting
- Network Switches
- Counting
- Digital bus buffer
- Clocks
- Parallel Output
- Multi-line decoders
- Pattern Generators
