74ACT374PC
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Supplier Device Package | 20-PDIP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ACT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.5V~5.5V |
| Frequency | 160MHz |
| Base Part Number | 74ACT374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Output Current | 24mA |
| Number of Bits | 8 |
| Clock Frequency | 160MHz |
| Propagation Delay | 12.5 ns |
| Turn On Delay Time | 8.5 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 40μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 10ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -24mA |
| Input Capacitance | 4.5pF |
| Low Level Output Current | 24mA |
| Number of Input Lines | 1 |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74ACT374PC Overview
As a result, it is packaged as 20-DIP (0.300, 7.62mm). You can find it in the Tubepackage. As configured, the output uses Tri-State, Non-Inverted. The trigger it is configured with uses Positive Edge. The electronic part is mounted in the way of Through Hole. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. It is at -40°C~85°C TAdegrees Celsius that the system is operating. The type of this D latch is D-Type. In terms of FPGAs, it belongs to the 74ACT series. You should not exceed 160MHzin its output frequency. There are 1 elements in it. As a result, it consumes 40μA quiescent current. D latch belongs to the 74ACT374 family. The input capacitance of this JK flip flopis 4.5pF farads. There is an electronic part that is mounted in the way of Through Hole. There are 20pins on it. A Positive Edgeclock edge trigger is used in this device. It is designed with a number of bits of 8. Its flexibility is enhanced by 8 circuits. The supply voltage should be maintained at 5V for high efficiency. With a current output of 24mA , it offers maximum design flexibility. There are 3 output lines in this JK flip flop. It is reported that there are 1 input lines. The high level output current is set to -24mA. In the low level output current setting, 24mAis used. It is recommended that the operating temperature be lower than 85°C. Operating temperatures should be above -40°C. Initially, it requires a voltage of 4.5V as the minimum supply voltage. There is a maximum supply voltage of 5.5V. The frequency that can be achieved is 160MHz.
74ACT374PC Features
Tube package
74ACT series
20 pins
8 Bits
74ACT374PC Applications
There are a lot of ON Semiconductor 74ACT374PC Flip Flops applications.
- Storage registers
- Buffer registers
- ESD performance
- Buffered Clock
- Reduced system switching noise
- Event Detectors
- Set-reset capability
- Asynchronous counter
- Pattern generators
- Data storage
