74ACT374TTR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ACT374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 260MHz |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 5 ns |
| Family | ACT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 24mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 10ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74ACT374TTR Overview
As a result, it is packaged as 20-TSSOP (0.173, 4.40mm Width). There is an embedded version in the package Tape & Reel (TR). Tri-State, Non-Invertedis the output configured for it. It is configured with a trigger that uses a value of Positive Edge. Surface Mountis in the way of this electric part. With a supply voltage of 4.5V~5.5V volts, it operates. In the operating environment, the temperature is -55°C~125°C TA. The type of this D latch is D-Type. FPGAs belonging to the 74ACTseries contain this type of chip. This D flip flop should not have a frequency greater than 260MHz. D latch consists of 1 elements. As a result, it consumes 4μA quiescent current. Terminations are 20. The object belongs to the 74ACT374 family. Power is provided by a 5V supply. Input capacitance of this device is 3pF farads. In terms of electronic devices, this device belongs to the ACTfamily of devices. There is an electronic component mounted in the way of Surface Mount. With its 20pins, it is designed to work with most electronic flip flops. In this device, the clock edge trigger type is Positive Edge. The RS flip flops belongs to FF/Latches base part number. It is designed with a number of bits of 8. To achieve this superior flexibility, 8 circuits are used. This D flip flop is well suited for TAPE AND REEL based on its reliable performance. A power supply of 5Vis required to operate it. This flip flop has a total of 2ports. A high level of efficiency can be achieved by maintaining the supply voltage at 5V. The JK flip flop is with 3 output lines to operate.
74ACT374TTR Features
Tape & Reel (TR) package
74ACT series
20 pins
8 Bits
5V power supplies
74ACT374TTR Applications
There are a lot of STMicroelectronics 74ACT374TTR Flip Flops applications.
- Bus hold
- Buffer registers
- Balanced Propagation Delays
- Safety Clamp
- Data storage
- Event Detectors
- Divide a clock signal by 2 or 4
- Modulo – n – counter
- Supports Live Insertion
- Balanced 24 mA output drivers
