74ACT377PC
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ACT |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | MATTE TIN |
| Additional Feature | WITH HOLD MODE |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| JESD-30 Code | R-PDIP-T20 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Clock Frequency | 175MHz |
| Family | ACT |
| Current - Quiescent (Iq) | 40μA |
| Current - Output High, Low | 24mA 24mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 10ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Length | 26.075mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
74ACT377PC Overview
It is embeded in 20-DIP (0.300, 7.62mm) case. D flip flop is embedded in the Tube package. Currently, the output is configured to use Non-Inverted. In the configuration of the trigger, Positive Edgeis used. It is mounted in the way of Through Hole. A supply voltage of 4.5V~5.5V is required for operation. It is at -40°C~85°C TAdegrees Celsius that the system is operating. This D latch has the type D-Type. The 74ACTseries comprises this type of FPGA. Its output frequency should not exceed 175MHz. The list contains 1 elements. As a result, it consumes 40μA quiescent current. There have been 20 terminations. A voltage of 5V is used to power it. A 4.5pFfarad input capacitance is provided by this T flip flop. In this case, the D flip flop belongs to the ACTfamily. 5.5Vis the maximum supply voltage (Vsup). Normal operation requires a supply voltage (Vsup) above 4.5V. As an additional reference, you may refer to electronic flip flop WITH HOLD MODE.
74ACT377PC Features
Tube package
74ACT series
74ACT377PC Applications
There are a lot of Rochester Electronics, LLC 74ACT377PC Flip Flops applications.
- High Performance Logic for test systems
- Buffer registers
- Latch
- Count Modes
- Cold spare funcion
- Registers
- Guaranteed simultaneous switching noise level
- Modulo – n – counter
- Counters
- Event Detectors
