74ACT534SC
| Parameters | |
|---|---|
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 8 |
| Clock Frequency | 100MHz |
| Propagation Delay | 11.5 ns |
| Turn On Delay Time | 6.5 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 40μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 11.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -24mA |
| Input Capacitance | 4.5pF |
| Low Level Output Current | 24mA |
| Number of Input Lines | 8 |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Supplier Device Package | 20-SOIC |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1999 |
| Series | 74ACT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.5V~5.5V |
| Frequency | 100MHz |
| Base Part Number | 74ACT534 |
| Function | Standard |
| Output Type | Tri-State, Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Inverting |
74ACT534SC Overview
As a result, it is packaged as 20-SOIC (0.295, 7.50mm Width). The Tubepackage contains it. Currently, the output is configured to use Tri-State, Inverted. It is configured with a trigger that uses Positive Edge. Surface Mountis occupied by this electronic component. The supply voltage is set to 4.5V~5.5V. It is operating at -40°C~85°C TA. It belongs to the type D-Typeof flip flops. The FPGA belongs to the 74ACT series. In order for it to function properly, its output frequency should not exceed 100MHz. A total of 1elements are present in it. Despite external influences, it consumes 40μAof quiescent current. D latch belongs to the 74ACT534 family. There is 4.5pF input capacitance for this T flip flop. It is mounted in the way of Surface Mount. A total of 20pins are provided on this board. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. It is designed with 8bits. To achieve this superior flexibility, 8 circuits are used. If high efficiency is desired, the supply voltage should be kept at 5V. There are 3 output lines on it. Currently, there are 8 input lines present. In this case, the high level output current is set to -24mA. In the low level output current setting, 24mAis used. Temperatures below 85°Care ideal for operating. In order for the system to operate properly, the temperature should be higher than -40°C. The system operates with a minimum supply voltage of 4.5V. It is capable of supporting a maximum supply voltage of 5.5V. The frequency that can be achieved is 100MHz.
74ACT534SC Features
Tube package
74ACT series
20 pins
8 Bits
74ACT534SC Applications
There are a lot of ON Semiconductor 74ACT534SC Flip Flops applications.
- Single Down Count-Control Line
- Convert a momentary switch to a toggle switch
- Pattern generators
- Event Detectors
- Dynamic threshold performance
- ATE
- Balanced Propagation Delays
- Communications
- Functionally equivalent to the MC10/100EL29
- Load Control
