74ACT573B
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 74ACT |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ACT573 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 5 ns |
| Family | ACT |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
74ACT573B Overview
There is an embedded version of it in package 20-DIP (0.300, 7.62mm). This package has the format of Tube. The output it is configured with uses Tri-State. This electrical device has Logic type D-Type Transparent Latch. Through Hole is used to mount this electronic part. In order for it to operate, it needs a supply voltage of 4.5V~5.5V. The temperature at which the machine is operating is -55°C~125°C. In the 74ACT series, this FPGA is located. With this electronic part, there are 8 bits. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It is a member of the 74ACT573 family. The device is operated when the supply voltage is set to 5V. 20 pins are provided. This electronic device is categorized as a ACT electronic device. 20 pins are used in its design. It is mounted according to the Through Hole method. This device has a total of 2 ports. It belongs to the subcategory of FF/Latches. During this period, the maximum supply voltage (Vsup) reaches 5.5V. There is 5V power supply for it. Ensure that the supply voltage (Vsup) is greater than 4.5V. 3 output lines generate the binary equivalent of the input lines. 8 circuits are used to provide this superior level of flexibility.
74ACT573B Features
20-DIP (0.300, 7.62mm) package
74ACT series
8 Bits
74ACT573 family
20 pin count
20 pins
5V power supplies
74ACT573B Applications
There are a lot of STMicroelectronics 74ACT573B Latches applications.
- Multi-line decoders
- Decade counting
- Relay
- High-speed logic
- Up/down difference counting
- Serial Output Data Queuing
- Display driver
- Frequency dividing
- Buffer register
- Parallel data storage
