74ACT573PC
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Supplier Device Package | 20-PDIP |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74ACT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.5V~5.5V |
| Base Part Number | 74ACT573 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 12.5 ns |
| Turn On Delay Time | 6 ns |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Number of Gates | 8 |
| High Level Output Current | -24mA |
| Low Level Output Current | 24mA |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Delay Time - Propagation | 6ns |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74ACT573PC Overview
In the package 20-DIP (0.300, 7.62mm), it can be found. Tube is the way it is packaged. It uses Tri-State as the output. There is a logic type of D-Type Transparent Latch associated with this electrical device. Electronic parts are mounted in accordance with Through Hole. It operates at a voltage of 4.5V~5.5V. A temperature of -40°C~85°C is set as the operating temperature. The 74ACT series contains FPGAs of this type. This electronic part is designed with 8 Bits. 74ACT573 is the family name of it. In addition, it is designed with a pin number of 20. This electronic part is mounted in the way of Through Hole. An electronic circuit can be found on 8 input lines. With 24mA, maximum design flexibility is ensured. High efficiency requires a supply voltage of 5V. It follows that 3 output lines are generated from the binary equivalent of the input line. A total of 1 elements make up this object. 8 circuits are used to provide this superior level of flexibility. 24mA is set as the low level output current. There is -24mA high level output current set. Operating temperatures should be below 85°C. It is recommended to operate at a temperature higher than -40°C. It supports the maximal supply voltage of 5.5V. A voltage of 4.5V is the minimum supply voltage required for it to operate.
74ACT573PC Features
20-DIP (0.300, 7.62mm) package
74ACT series
8 Bits
74ACT573 family
20 pins
1 elements
74ACT573PC Applications
There are a lot of ON Semiconductor 74ACT573PC Latches applications.
- Programmable binary
- Up/down difference counting
- PCs and Notebooks
- Relay replacement
- Parallel Output
- Serial Output Data Queuing
- Meter applications
- Multi-line decoders
- Shift Registers
- Ring counter
