Parameters |
Package / Case |
20-SOIC (0.209, 5.30mm Width) |
Number of Pins |
20 |
Supplier Device Package |
20-SOP |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Series |
74ACT |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Voltage - Supply |
4.5V~5.5V |
Base Part Number |
74ACT573 |
Output Type |
Tri-State |
Operating Supply Voltage |
5V |
Number of Elements |
1 |
Circuit |
8:8 |
Polarity |
Non-Inverting |
Number of Circuits |
8 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
4.5V |
Number of Bits |
8 |
Propagation Delay |
10.5 ns |
Turn On Delay Time |
6 ns |
Logic Function |
D-Type, Latch |
Current - Output High, Low |
24mA 24mA |
Logic Type |
D-Type Transparent Latch |
High Level Output Current |
-24mA |
Low Level Output Current |
24mA |
Number of Input Lines |
8 |
Independent Circuits |
1 |
Number of Output Lines |
3 |
Delay Time - Propagation |
6ns |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
74ACT573SJ Overview
It is embedded in the 20-SOIC (0.209, 5.30mm Width) package. Tube is the way in which it is packaged. It uses Tri-State as its output configuration. There is a logic type of D-Type Transparent Latch for this electrical device. Electronic components are mounted using the Surface Mount method. The voltage supply is 4.5V~5.5V. There is a temperature of -40°C~85°C at which the system operates. This FPGA is part of the 74ACT series. Electronic parts with 8 bits are designed for this application. The family it belongs to is 74ACT573. In addition, it is designed with a pin number of 20. Mounting this electronic component follows the Surface Mount method. It consists of 8 input lines from which an electronic circuit can be built. The supply voltage should be maintained at 5V for high efficiency. A binary equivalent of the input line is generated by the 3 output lines. A total of 1 elements are contained in it. Its superior flexibility is achieved by using 8 circuits. It has been set to 24mA for the low level output current. It is set to zero for the high level output current. There should be a temperature below 85°C at which the system is operating. Temperatures above -40°C should be used. The supply voltage is limited to 5.5V. With a minimum supply voltage of 4.5V, it operates.
74ACT573SJ Features
20-SOIC (0.209, 5.30mm Width) package
74ACT series
8 Bits
74ACT573 family
20 pins
1 elements
74ACT573SJ Applications
There are a lot of ON Semiconductor 74ACT573SJ Latches applications.
- Counting
- Clocks
- Frequency
- Display
- Parallel Input
- Counters
- Automotive ADAS
- Counter timers
- Automotive Body Electronics
- Communication systems