74ACT574PC
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Supplier Device Package | 20-PDIP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ACT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Type | D-Type |
| Voltage - Supply | 4.5V~5.5V |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Clock Frequency | 110MHz |
| Current - Quiescent (Iq) | 40μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 11ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| RoHS Status | ROHS3 Compliant |
74ACT574PC Overview
The flip flop is packaged in 20-DIP (0.300, 7.62mm). The package Tubecontains it. T flip flop uses Tri-State, Non-Invertedas the output. JK flip flop uses Positive Edgeas the trigger. In this case, the electronic component is mounted in the way of Through Hole. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. It is operating at a temperature of -40°C~85°C TA. This D latch has the type D-Type. JK flip flop belongs to the 74ACTseries of FPGAs. A frequency of 110MHzshould not be exceeded by its output. D latch consists of 1 elements. As a result, it consumes 40μA quiescent current. A JK flip flop with a 4.5pFfarad input capacitance is used here.
74ACT574PC Features
Tube package
74ACT series
74ACT574PC Applications
There are a lot of Rochester Electronics, LLC 74ACT574PC Flip Flops applications.
- Cold spare funcion
- Computers
- Digital electronics systems
- ESD protection
- Bus hold
- Load Control
- Storage registers
- Pattern generators
- Buffer registers
- Asynchronous counter
