74ACT574PC
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1999 |
| Series | 74ACT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | Through Hole |
| Type | D-Type |
| Voltage - Supply | 4.5V~5.5V |
| Base Part Number | 74ACT574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Output Current | 24mA |
| Clock Frequency | 110MHz |
| Propagation Delay | 11 ns |
| Turn On Delay Time | 7 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 40μA |
| Current - Output High, Low | 24mA 24mA |
| Max Propagation Delay @ V, Max CL | 11ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74ACT574PC Overview
It is packaged in the way of 20-DIP (0.300, 7.62mm). D flip flop is embedded in the Tube package. It is configured with Tri-State, Non-Invertedas an output. It is configured with the trigger Positive Edge. There is an electronic component mounted in the way of Through Hole. A supply voltage of 4.5V~5.5V is required for operation. It is at -40°C~85°C TAdegrees Celsius that the system is operating. There is D-Type type of electronic flip flop associated with this device. In FPGA terms, D flip flop is a type of 74ACTseries FPGA. It should not exceed 110MHzin terms of its output frequency. The list contains 1 elements. As a result, it consumes 40μA quiescent current. If you search by 74ACT574, you will find similar parts. The input capacitance of this JK flip flopis 4.5pF farads. Through Hole mounts this electronic component. This board is designed with 20pins on it. It has a clock edge trigger type of Positive Edge. 8 circuits are used to achieve its superior flexibility. The 24mA output current allows it to be designed with the greatest amount of flexibility. The JK flip flop is with 3 output lines to operate.
74ACT574PC Features
Tube package
74ACT series
20 pins
74ACT574PC Applications
There are a lot of ON Semiconductor 74ACT574PC Flip Flops applications.
- Balanced 24 mA output drivers
- Clock pulse
- Shift Registers
- Buffered Clock
- Single Up Count-Control Line
- Patented noise
- Frequency Dividers
- Divide a clock signal by 2 or 4
- High Performance Logic for test systems
- Bounce elimination switch
