74ACT574SJX
| Parameters | |
|---|---|
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 8 |
| Clock Frequency | 110MHz |
| Propagation Delay | 11 ns |
| Turn On Delay Time | 7 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 40μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 11ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -24mA |
| Input Capacitance | 4.5pF |
| Low Level Output Current | 24mA |
| Number of Input Lines | 8 |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Supplier Device Package | 20-SOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ACT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.5V~5.5V |
| Frequency | 110MHz |
| Base Part Number | 74ACT574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
74ACT574SJX Overview
It is packaged in the way of 20-SOIC (0.209, 5.30mm Width). A package named Tape & Reel (TR)includes it. T flip flop is configured with an output of Tri-State, Non-Inverted. It is configured with the trigger Positive Edge. Surface Mountis positioned in the way of this electronic part. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. -40°C~85°C TAis the operating temperature. This electronic flip flop is of type D-Type. It belongs to the 74ACTseries of FPGAs. In order for it to function properly, its output frequency should not exceed 110MHz. The element count is 1 . As a result, it consumes 40μA of quiescent current without being affected by external factors. The object belongs to the 74ACT574 family. Its input capacitance is 4.5pFfarads. Electronic part Surface Mountis mounted in the way. As you can see from the design, it has pins with 20. Its clock edge trigger type is Positive Edge. The flip flop is designed with 8bits. The superior flexibility of this circuit is achieved by using 8 circuits. In order to ensure high efficiency, the supply voltage should remain at 5V. There are no output lines on the JK flip flop. 8input lines are available for you to choose from. -24mA is set as the high level output current. There is 24mA output current at the low level. Temperatures below 85°Care ideal for operating. It is recommended that the operating temperature be greater than -40°C. The RS flip flop is designed to operate with a minimal supply voltage of 4.5VV. It is capable of supporting a maximum supply voltage of 5.5V. It is possible to achieve a frequency of 110MHz.
74ACT574SJX Features
Tape & Reel (TR) package
74ACT series
20 pins
8 Bits
74ACT574SJX Applications
There are a lot of ON Semiconductor 74ACT574SJX Flip Flops applications.
- Memory
- Storage Registers
- Balanced 24 mA output drivers
- Balanced Propagation Delays
- Asynchronous counter
- Functionally equivalent to the MC10/100EL29
- Bounce elimination switch
- Reduced system switching noise
- Individual Asynchronous Resets
- Test & Measurement
