74ACT74MTC
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ACT |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | MATTE TIN |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Clock Frequency | 210MHz |
| Family | ACT |
| Current - Quiescent (Iq) | 20μA |
| Current - Output High, Low | 24mA 24mA |
| Output Polarity | COMPLEMENTARY |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 11ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
74ACT74MTC Overview
The flip flop is packaged in a case of 14-TSSOP (0.173, 4.40mm Width). The package Tubecontains it. T flip flop uses Differentialas the output. It is configured with a trigger that uses a value of Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. A temperature of -40°C~85°C TAis considered to be the operating temperature. It belongs to the type D-Typeof flip flops. JK flip flop belongs to the 74ACTseries of FPGAs. Its output frequency should not exceed 210MHz Hz. D latch consists of 2 elements. As a result, it consumes 20μA quiescent current and is not affected by external forces. There have been 14 terminations. Power is supplied from a voltage of 5V volts. This T flip flop has a capacitance of 4.5pF farads at the input. Electronic devices of this type belong to the ACTfamily. As soon as Vsup reaches 5.5V, the maximum supply voltage is reached. Normal operation requires a supply voltage (Vsup) above 4.5V.
74ACT74MTC Features
Tube package
74ACT series
74ACT74MTC Applications
There are a lot of Rochester Electronics, LLC 74ACT74MTC Flip Flops applications.
- Bounce elimination switch
- Memory
- Counters
- Pattern generators
- Count Modes
- Buffered Clock
- ESD performance
- CMOS Process
- Communications
- Individual Asynchronous Resets
