74ACT74SC
| Parameters | |
|---|---|
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Supplier Device Package | 14-SOIC |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1998 |
| Series | 74ACT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.5V~5.5V |
| Frequency | 210MHz |
| Base Part Number | 74ACT74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Voltage | 5V |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Output Current | 24mA |
| Number of Bits | 2 |
| Clock Frequency | 210MHz |
| Propagation Delay | 11 ns |
| Turn On Delay Time | 7.5 ns |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 20μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Gates | 2 |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 11ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -24mA |
| Input Capacitance | 4.5pF |
| Low Level Output Current | 24mA |
| Number of Input Lines | 1 |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
74ACT74SC Overview
In the form of 14-SOIC (0.154, 3.90mm Width), it has been packaged. It is included in the package Tube. This output is configured with Differential. JK flip flop uses Positive Edgeas the trigger. The electronic part is mounted in the way of Surface Mount. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. In the operating environment, the temperature is -40°C~85°C TA. This logic flip flop is classified as type D-Type. It belongs to the 74ACTseries of FPGAs. Its output frequency should not exceed 210MHz. In total, there are 2 elements. Despite external influences, it consumes 20μAof quiescent current. D latch belongs to the 74ACT74 family. Input capacitance of this device is 4.5pF farads. Electronic part Surface Mountis mounted in the way. A total of 14pins are provided on this board. Its clock edge trigger type is Positive Edge. It is designed with a number of bits of 2. The superior flexibility of this circuit is achieved by using 2 circuits. Optimal efficiency requires a supply voltage of 5V. It offers maximum design flexibility with its output current of 24mA. In order for the chip to function, it has 1output lines. There are 1 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. The high level output current is set to -24mA. It is set to 24mAfor low level output current. A temperature below 85°Cshould be used for operation. Temperatures above -40°Cshould be used. Despite its minimal supply voltage of 4.5V, it is capable of operating. There is a maximum supply voltage of 5.5V. This frequency can be achieved 210MHz. 2 gates are contained in its basic building block.
74ACT74SC Features
Tube package
74ACT series
14 pins
2 Bits
2 gates
74ACT74SC Applications
There are a lot of ON Semiconductor 74ACT74SC Flip Flops applications.
- Consumer
- Computing
- Buffered Clock
- Pattern generators
- Latch-up performance
- Storage Registers
- Patented noise
- Single Down Count-Control Line
- Dynamic threshold performance
- Convert a momentary switch to a toggle switch
