74ACT821SCX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Supplier Device Package | 24-SOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ACT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.5V~5.5V |
| Frequency | 150MHz |
| Base Part Number | 74ACT821 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 10 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 10 |
| Clock Frequency | 150MHz |
| Propagation Delay | 9.5 ns |
| Turn On Delay Time | 6 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 80μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 10 |
| Max Propagation Delay @ V, Max CL | 9.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -24mA |
| Input Capacitance | 4.5pF |
| Low Level Output Current | 24mA |
| Number of Input Lines | 10 |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74ACT821SCX Overview
In the form of 24-SOIC (0.295, 7.50mm Width), it has been packaged. A package named Tape & Reel (TR)includes it. T flip flop uses Tri-State, Non-Invertedas the output. It is configured with a trigger that uses a value of Positive Edge. There is an electric part mounted in the way of Surface Mount. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. The operating temperature is -40°C~85°C TA. The type of this D latch is D-Type. The 74ACTseries comprises this type of FPGA. A frequency of 150MHzshould not be exceeded by its output. In total, there are 1 elements. There is 80μA quiescent consumption. The 74ACT821 family contains this object. A JK flip flop with a 4.5pFfarad input capacitance is used here. In this case, the electronic component is mounted in the way of Surface Mount. With its 24pins, it is designed to work with most electronic flip flops. This device exhibits a clock edge trigger type of Positive Edge. The design is based on 10bits. Its superior flexibility is attributed to its use of 10 circuits. In order to ensure high efficiency, the supply voltage should remain at 5V. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. 10input lines are available for you to choose from. -24mAis the output current at high level. In the low level output current setting, the current is set to 24mA. It is recommended that the operating temperature be lower than 85°C. Ideally, the operating temperature should be higher than -40°C. It operates with the minimal supply voltage of 4.5V. It supports a maximum supply voltage of 5.5V volts. It is possible to obtain a frequency of 150MHz.
74ACT821SCX Features
Tape & Reel (TR) package
74ACT series
24 pins
10 Bits
74ACT821SCX Applications
There are a lot of ON Semiconductor 74ACT821SCX Flip Flops applications.
- ESCC
- Instrumentation
- Data transfer
- Circuit Design
- Individual Asynchronous Resets
- Common Clocks
- Shift Registers
- Control circuits
- Pattern generators
- Memory
